Re: [PATCH v3 1/4] dt-bindings: net: Add TI WiLink shared transport binding

On Apr 13, 2017 10:04 AM, "Rob Herring" [off-list ref] wrote:

Add serial slave device binding for the TI WiLink series of Bluetooth/FM/GPS
devices.

Signed-off-by: Rob Herring <redacted>
Cc: Mark Rutland <redacted>
Cc: netdev-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Cc: devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
---
v3:
- rebase on bluetooth-next

 .../devicetree/bindings/net/ti,wilink-st.txt       | 35
++++++++++++++++++++++
 1 file changed, 35 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/net/ti,wilink-st.txt

diff --git a/Documentation/devicetree/bindings/net/ti,wilink-st.txt

b/Documentation/devicetree/bindings/net/ti,wilink-st.txt
new file mode 100644
index 000000000000..cbad73a84ac4

--- /dev/null
+++ b/Documentation/devicetree/bindings/net/ti,wilink-st.txt

@@ -0,0 +1,35 @@
+TI WiLink 7/8 (wl12xx/wl18xx) Shared Transport BT/FM/GPS devices
+
+TI WiLink devices have a UART interface for providing Bluetooth, FM radio,
+and GPS over what's called "shared transport". The shared transport is
+standard BT HCI protocol with additional channels for the other functions.
+
+These devices also have a separate WiFi interface as described in
+wireless/ti,wlcore.txt.
+
+This bindings follows the UART slave device binding in
+../serial/slave-device.txt.
+
+Required properties:
+ - compatible: should be one of the following:
+    "ti,wl1271-st"
+    "ti,wl1273-st"
+    "ti,wl1831-st"
+    "ti,wl1835-st"
+    "ti,wl1837-st"
+

Would you expect the wl1283 chipset too?