Thread (12 messages) flat view 12 messages, 3 authors, 2017-02-14
STALE3491d

Revision v4 of 4 in this series.

Revisions (4)
  1. v1 [diff vs current]
  2. v2 [diff vs current]
  3. v3 [diff vs current]
  4. v4 current

[PATCH v4 net-next 8/8] ldmvsw: disable tso and gso for bridge operations

From: Shannon Nelson <hidden>
Date: 2017-02-13 19:00:54
Also in: lkml, sparclinux
Subsystem: networking drivers, the rest · Maintainers: Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Linus Torvalds

The ldmvsw driver is specifically for supporting the ldom virtual
networking by running in the primary ldom and using the LDC to connect
the remaining ldoms to the outside world via a bridge.  With TSO and GSO
supported while connected the bridge, things tend to misbehave as seen
in our case by delayed packets, enough to begin triggering retransmits
and affecting overall throughput.  By turning off advertised support for
TSO and GSO we restore stable traffic flow through the bridge.

Orabug: 23293104

Signed-off-by: Shannon Nelson <redacted>
---
 drivers/net/ethernet/sun/ldmvsw.c         |    5 ++---
 drivers/net/ethernet/sun/sunvnet_common.c |    3 ++-
 2 files changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/net/ethernet/sun/ldmvsw.c b/drivers/net/ethernet/sun/ldmvsw.c
index f0fe6cf..89952de 100644
--- a/drivers/net/ethernet/sun/ldmvsw.c
+++ b/drivers/net/ethernet/sun/ldmvsw.c
@@ -234,8 +234,7 @@ static void vsw_poll_controller(struct net_device *dev)
 	dev->ethtool_ops = &vsw_ethtool_ops;
 	dev->watchdog_timeo = VSW_TX_TIMEOUT;
 
-	dev->hw_features = NETIF_F_TSO | NETIF_F_GSO | NETIF_F_GSO_SOFTWARE |
-			   NETIF_F_HW_CSUM | NETIF_F_SG;
+	dev->hw_features = NETIF_F_HW_CSUM | NETIF_F_SG;
 	dev->features = dev->hw_features;
 
 	/* MTU range: 68 - 65535 */
@@ -320,7 +319,7 @@ static int vsw_port_probe(struct vio_dev *vdev, const struct vio_device_id *id)
 	port->vp = vp;
 	port->dev = dev;
 	port->switch_port = 1;
-	port->tso = true;
+	port->tso = false; /* no tso in vsw, misbehaves in bridge */
 	port->tsolen = 0;
 
 	/* Mark the port as belonging to ldmvsw which directs the
diff --git a/drivers/net/ethernet/sun/sunvnet_common.c b/drivers/net/ethernet/sun/sunvnet_common.c
index 65f7038..fa2d11c 100644
--- a/drivers/net/ethernet/sun/sunvnet_common.c
+++ b/drivers/net/ethernet/sun/sunvnet_common.c
@@ -186,6 +186,7 @@ static int handle_attr_info(struct vio_driver_state *vio,
 	} else {
 		pkt->cflags &= ~VNET_LSO_IPV4_CAPAB;
 		pkt->ipv4_lso_maxlen = 0;
+		port->tsolen = 0;
 	}
 
 	/* for version >= 1.6, ACK packet mode we support */
@@ -1635,7 +1636,7 @@ static void vnet_port_reset(struct vnet_port *port)
 	del_timer(&port->clean_timer);
 	sunvnet_port_free_tx_bufs_common(port);
 	port->rmtu = 0;
-	port->tso = true;
+	port->tso = (port->vsw == 0);  /* no tso in vsw, misbehaves in bridge */
 	port->tsolen = 0;
 }
 
-- 
1.7.1
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help