[PATCH v5 net-next] net: mvneta: implement .set_wol and .get_wol
From: Jisheng Zhang <hidden>
Date: 2017-02-06 07:02:49
Also in:
lkml
Subsystem:
marvell mvneta ethernet driver, networking drivers, the rest · Maintainers:
Marcin Wojtas, Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Linus Torvalds
From: Jingju Hou <redacted> The mvneta itself does not support WOL, but the PHY might. So pass the calls to the PHY Signed-off-by: Jingju Hou <redacted> Signed-off-by: Jisheng Zhang <redacted> --- since v4: - address Andrew Lunn's comment since v3: - really fix the build error since v2,v1: - using phy_dev member in struct net_device - add commit msg drivers/net/ethernet/marvell/mvneta.c | 21 +++++++++++++++++++++ 1 file changed, 21 insertions(+)
diff --git a/drivers/net/ethernet/marvell/mvneta.c b/drivers/net/ethernet/marvell/mvneta.c
index de6c47744b8e..0f4d1697be46 100644
--- a/drivers/net/ethernet/marvell/mvneta.c
+++ b/drivers/net/ethernet/marvell/mvneta.c@@ -3927,6 +3927,25 @@ static int mvneta_ethtool_get_rxfh(struct net_device *dev, u32 *indir, u8 *key, return 0; } +static void mvneta_ethtool_get_wol(struct net_device *dev, + struct ethtool_wolinfo *wol) +{ + wol->supported = 0; + wol->wolopts = 0; + + if (dev->phydev) + phy_ethtool_get_wol(dev->phydev, wol); +} + +static int mvneta_ethtool_set_wol(struct net_device *dev, + struct ethtool_wolinfo *wol) +{ + if (!dev->phydev) + return -EOPNOTSUPP; + + return phy_ethtool_set_wol(dev->phydev, wol); +} + static const struct net_device_ops mvneta_netdev_ops = { .ndo_open = mvneta_open, .ndo_stop = mvneta_stop,
@@ -3956,6 +3975,8 @@ const struct ethtool_ops mvneta_eth_tool_ops = { .set_rxfh = mvneta_ethtool_set_rxfh, .get_link_ksettings = phy_ethtool_get_link_ksettings, .set_link_ksettings = mvneta_ethtool_set_link_ksettings, + .get_wol = mvneta_ethtool_get_wol, + .set_wol = mvneta_ethtool_set_wol, }; /* Initialize hw */
--
2.11.0