Thread (8 messages) flat view 8 messages, 3 authors, 2017-02-06

Re: [PATCH 3/3] net: ethernet: bgmac: driver power manangement

From: Florian Fainelli <f.fainelli@gmail.com>
Date: 2017-02-04 02:16:43
Also in: lkml

On 02/03/2017 01:39 PM, Jon Mason wrote:
From: Joey Zhong <redacted>

Implements suspend/resume, external phy 54810 is assumed
to remain powered up during deep-sleep for wake-on-lane.
s/wake-on-lane/Wake-on-LAN, are you positive phy_stop() is not
suspending the PHY and issuing BMCR_PWRDOWN write?

This also seems incomplete in that, if the device is really configured
for Wake-on-LAN (through ethtool) you should call
device_set_wakeup_capable() and then check for device_may_wakeup()
during suspend or resume to know which part of the suspend/resume
portion should be done. You could refer to bcmgenet for an example.
 
+int bgmac_enet_suspend(struct bgmac *bgmac)
+{
+	netdev_info(bgmac->net_dev, "Suspending\n");
remove that message
+
+	if (netif_running(bgmac->net_dev)) {
+		netif_stop_queue(bgmac->net_dev);
+
+		napi_disable(&bgmac->napi);
+
+		netif_tx_lock(bgmac->net_dev);
+		netif_device_detach(bgmac->net_dev);
+		netif_tx_unlock(bgmac->net_dev);
+
+		bgmac_chip_intrs_off(bgmac);
+		bgmac_chip_reset(bgmac);
+		bgmac_dma_cleanup(bgmac);
+	}
Can you change the indentation to test for netiff_running() first and
return 0 in that case?
+
+	phy_stop(bgmac->net_dev->phydev);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(bgmac_enet_suspend);
+
+int bgmac_enet_resume(struct bgmac *bgmac)
+{
+	int rc;
+
+	netdev_info(bgmac->net_dev, "Resuming\n");
Same here, this needs to be removed.
+
+	phy_start(bgmac->net_dev->phydev);
+
+	if (netif_running(bgmac->net_dev)) {
+		rc = bgmac_dma_init(bgmac);
+		if (rc)
+			return rc;
+
+		bgmac_chip_init(bgmac);
+
+		napi_enable(&bgmac->napi);
+
+		netif_tx_lock(bgmac->net_dev);
+		netif_device_attach(bgmac->net_dev);
+		netif_tx_unlock(bgmac->net_dev);
+
+		netif_start_queue(bgmac->net_dev);
+	}
-- 
Florian
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help