Thread (17 messages) flat view 17 messages, 3 authors, 2017-02-04
STALE3498d

Revision v1 of 4 in this series.

Revisions (4)
  1. v1 current
  2. v2 [diff vs current]
  3. v3 [diff vs current]
  4. v4 [diff vs current]

[PATCH net-next 6/9] sunvnet: straighten up message event handling logic

From: Shannon Nelson <hidden>
Date: 2017-02-03 17:44:31
Also in: lkml, sparclinux
Subsystem: networking drivers, the rest · Maintainers: Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Linus Torvalds

The use of gotos for handling the incoming events made this code
harder to read and support than it should be.  This patch straightens
out and clears up the logic.

Signed-off-by: Shannon Nelson <redacted>
---
 drivers/net/ethernet/sun/sunvnet_common.c |   94 ++++++++++++++---------------
 1 files changed, 45 insertions(+), 49 deletions(-)
diff --git a/drivers/net/ethernet/sun/sunvnet_common.c b/drivers/net/ethernet/sun/sunvnet_common.c
index 98e758e..160b35a 100644
--- a/drivers/net/ethernet/sun/sunvnet_common.c
+++ b/drivers/net/ethernet/sun/sunvnet_common.c
@@ -764,41 +764,37 @@ static int vnet_event_napi(struct vnet_port *port, int budget)
 	struct vio_driver_state *vio = &port->vio;
 	int tx_wakeup, err;
 	int npkts = 0;
-	int event = (port->rx_event & LDC_EVENT_RESET);
-
-ldc_ctrl:
-	if (unlikely(event == LDC_EVENT_RESET ||
-		     event == LDC_EVENT_UP)) {
-		vio_link_state_change(vio, event);
-
-		if (event == LDC_EVENT_RESET) {
-			vnet_port_reset(port);
-			vio_port_up(vio);
-
-			/* If the device is running but its tx queue was
-			 * stopped (due to flow control), restart it.
-			 * This is necessary since vnet_port_reset()
-			 * clears the tx drings and thus we may never get
-			 * back a VIO_TYPE_DATA ACK packet - which is
-			 * the normal mechanism to restart the tx queue.
-			 */
-			if (netif_running(dev))
-				maybe_tx_wakeup(port);
-		}
+
+	/* we don't expect any other bits */
+	BUG_ON(port->rx_event & ~(LDC_EVENT_DATA_READY |
+				  LDC_EVENT_RESET |
+				  LDC_EVENT_UP));
+
+	/* RESET takes precedent over any other event */
+	if (port->rx_event & LDC_EVENT_RESET) {
+		vio_link_state_change(vio, LDC_EVENT_RESET);
+		vnet_port_reset(port);
+		vio_port_up(vio);
+
+		/* If the device is running but its tx queue was
+		 * stopped (due to flow control), restart it.
+		 * This is necessary since vnet_port_reset()
+		 * clears the tx drings and thus we may never get
+		 * back a VIO_TYPE_DATA ACK packet - which is
+		 * the normal mechanism to restart the tx queue.
+		 */
+		if (netif_running(dev))
+			maybe_tx_wakeup(port);
+
 		port->rx_event = 0;
 		return 0;
 	}
-	/* We may have multiple LDC events in rx_event. Unroll send_events() */
-	event = (port->rx_event & LDC_EVENT_UP);
-	port->rx_event &= ~(LDC_EVENT_RESET | LDC_EVENT_UP);
-	if (event == LDC_EVENT_UP)
-		goto ldc_ctrl;
-	event = port->rx_event;
-	if (!(event & LDC_EVENT_DATA_READY))
-		return 0;
 
-	/* we dont expect any other bits than RESET, UP, DATA_READY */
-	BUG_ON(event != LDC_EVENT_DATA_READY);
+	if (port->rx_event & LDC_EVENT_UP) {
+		vio_link_state_change(vio, LDC_EVENT_UP);
+		port->rx_event = 0;
+		return 0;
+	}
 
 	err = 0;
 	tx_wakeup = 0;
@@ -821,25 +817,25 @@ ldc_ctrl:
 			pkt->start_idx = vio_dring_next(dr,
 							port->napi_stop_idx);
 			pkt->end_idx = -1;
-			goto napi_resume;
-		}
-		err = ldc_read(vio->lp, &msgbuf, sizeof(msgbuf));
-		if (unlikely(err < 0)) {
-			if (err == -ECONNRESET)
-				vio_conn_reset(vio);
-			break;
+		} else {
+			err = ldc_read(vio->lp, &msgbuf, sizeof(msgbuf));
+			if (unlikely(err < 0)) {
+				if (err == -ECONNRESET)
+					vio_conn_reset(vio);
+				break;
+			}
+			if (err == 0)
+				break;
+			viodbg(DATA, "TAG [%02x:%02x:%04x:%08x]\n",
+			       msgbuf.tag.type,
+			       msgbuf.tag.stype,
+			       msgbuf.tag.stype_env,
+			       msgbuf.tag.sid);
+			err = vio_validate_sid(vio, &msgbuf.tag);
+			if (err < 0)
+				break;
 		}
-		if (err == 0)
-			break;
-		viodbg(DATA, "TAG [%02x:%02x:%04x:%08x]\n",
-		       msgbuf.tag.type,
-		       msgbuf.tag.stype,
-		       msgbuf.tag.stype_env,
-		       msgbuf.tag.sid);
-		err = vio_validate_sid(vio, &msgbuf.tag);
-		if (err < 0)
-			break;
-napi_resume:
+
 		if (likely(msgbuf.tag.type == VIO_TYPE_DATA)) {
 			if (msgbuf.tag.stype == VIO_SUBTYPE_INFO) {
 				if (!sunvnet_port_is_up_common(port)) {
-- 
1.7.1
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help