[PATCH net-next 2/2] ravb: Support 1Gbps on R-Car H3 ES1.1+ and R-Car M3-W
From: Simon Horman <hidden>
Date: 2017-01-27 11:05:32
Also in:
linux-renesas-soc
Subsystem:
networking drivers, renesas ethernet avb driver, the rest · Maintainers:
Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Niklas Söderlund, Linus Torvalds
From: Geert Uytterhoeven <geert+renesas@glider.be> The limitation to 10/100Mbit speeds on R-Car Gen3 is valid for R-Car H3 ES1.0 only. Check for the exact SoC model to allow 1Gbps on newer revisions of R-Car H3, and on R-Car M3-W. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <redacted> --- drivers/net/ethernet/renesas/ravb_main.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-)
diff --git a/drivers/net/ethernet/renesas/ravb_main.c b/drivers/net/ethernet/renesas/ravb_main.c
index 9fb4c04c5885..93cdadeae354 100644
--- a/drivers/net/ethernet/renesas/ravb_main.c
+++ b/drivers/net/ethernet/renesas/ravb_main.c@@ -31,6 +31,7 @@ #include <linux/pm_runtime.h> #include <linux/slab.h> #include <linux/spinlock.h> +#include <linux/sys_soc.h> #include <asm/div64.h>
@@ -973,6 +974,11 @@ static void ravb_adjust_link(struct net_device *ndev) phy_print_status(phydev); } +static const struct soc_device_attribute r8a7795es10[] = { + { .soc_id = "r8a7795", .revision = "ES1.0", }, + { /* sentinel */ } +}; + /* PHY init function */ static int ravb_phy_init(struct net_device *ndev) {
@@ -1008,10 +1014,10 @@ static int ravb_phy_init(struct net_device *ndev) goto err_deregister_fixed_link; } - /* This driver only support 10/100Mbit speeds on Gen3 + /* This driver only support 10/100Mbit speeds on R-Car H3 ES1.0 * at this time. */ - if (priv->chip_id == RCAR_GEN3) { + if (soc_device_match(r8a7795es10)) { err = phy_set_max_speed(phydev, SPEED_100); if (err) { netdev_err(ndev, "failed to limit PHY to 100Mbit/s\n");
--
2.7.0.rc3.207.g0ac5344