[PATCH v3 net-next] net: mvneta: implement .set_wol and .get_wol
From: Jingju Hou <hidden>
Date: 2017-01-23 04:12:00
Subsystem:
marvell mvneta ethernet driver, networking drivers, the rest · Maintainers:
Marcin Wojtas, Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Linus Torvalds
The mvneta itself does not support WOL, but the PHY might. So pass the calls to the PHY Signed-off-by: Jingju Hou <redacted> --- Since v2: - it should be phydev member not phy_dev drivers/net/ethernet/marvell/mvneta.c | 21 +++++++++++++++++++++ 1 file changed, 21 insertions(+)
diff --git a/drivers/net/ethernet/marvell/mvneta.c b/drivers/net/ethernet/marvell/mvneta.c
index e05e227..fea4968 100644
--- a/drivers/net/ethernet/marvell/mvneta.c
+++ b/drivers/net/ethernet/marvell/mvneta.c@@ -3908,6 +3908,25 @@ static int mvneta_ethtool_get_rxfh(struct net_device *dev, u32 *indir, u8 *key, return 0; } +static void +mvneta_ethtool_get_wol(struct net_device *dev, struct ethtool_wolinfo *wol) +{ + wol->supported = 0; + wol->wolopts = 0; + + if (dev->phy_dev) + return phy_ethtool_get_wol(dev->phydev, wol); +} + +static int +mvneta_ethtool_set_wol(struct net_device *dev, struct ethtool_wolinfo *wol) +{ + if (!dev->phydev) + return -EOPNOTSUPP; + + return phy_ethtool_set_wol(dev->phydev, wol); +} + static const struct net_device_ops mvneta_netdev_ops = { .ndo_open = mvneta_open, .ndo_stop = mvneta_stop,
@@ -3937,6 +3956,8 @@ static int mvneta_ethtool_get_rxfh(struct net_device *dev, u32 *indir, u8 *key, .set_rxfh = mvneta_ethtool_set_rxfh, .get_link_ksettings = phy_ethtool_get_link_ksettings, .set_link_ksettings = mvneta_ethtool_set_link_ksettings, + .get_wol = mvneta_ethtool_get_wol, + .set_wol = mvneta_ethtool_set_wol, }; /* Initialize hw */
--
1.9.1