[PATCH v2 3/3] arm64: dts: marvell: Add ethernet switch definition for the ESPRESSObin
From: Romain Perier <hidden>
Date: 2016-12-20 08:51:38
Also in:
linux-arm-kernel, linux-devicetree
Subsystem:
arm/marvell kirkwood and armada 370, 375, 38x, 39x, xp, 3700, 7k/8k, cn9130 soc support, the rest · Maintainers:
Andrew Lunn, Gregory Clement, Sebastian Hesselbarth, Linus Torvalds
This defines and enables the Marvell ethernet switch MVE886341 on the Marvell ESPRESSObin board. Signed-off-by: Romain Perier <redacted> --- Changes in v2: - EXPRESSObin -> ESPRESSObin - phy nodes definition must contain the internal bus address after the @ .../boot/dts/marvell/armada-3720-espressobin.dts | 67 ++++++++++++++++++++++ 1 file changed, 67 insertions(+)
diff --git a/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts b/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts
index 83178d9..9582661 100644
--- a/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts
+++ b/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts@@ -80,3 +80,70 @@ &usb3 { status = "okay"; }; + +&mdio { + switch0: switch0@0 { + compatible = "marvell,mv88e6085"; + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + dsa,member = <0 0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + label = "cpu"; + ethernet = <ð0>; + }; + + port@1 { + reg = <1>; + label = "wan"; + phy-handle = <&switch0phy0>; + }; + + port@2 { + reg = <2>; + label = "lan0"; + phy-handle = <&switch0phy1>; + }; + + port@3 { + reg = <3>; + label = "lan1"; + phy-handle = <&switch0phy2>; + }; + + }; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + switch0phy0: switch0phy0@11 { + reg = <0x11>; + }; + switch0phy1: switch0phy1@12 { + reg = <0x12>; + }; + switch0phy2: switch0phy2@13 { + reg = <0x13>; + }; + }; + }; +}; + +ð0 { + phy-mode = "rgmii-id"; + status = "okay"; + + fixed-link { + speed = <1000>; + full-duplex; + }; +};
--
2.9.3