[PATCH net 10/12] net/mlx5e: Check ets capability before initializing ets settings
From: Saeed Mahameed <hidden>
Date: 2016-12-28 12:58:58
Subsystem:
mellanox ethernet driver (mlx5e), mellanox mlx5 core vpi driver, networking drivers, the rest · Maintainers:
Saeed Mahameed, Tariq Toukan, Mark Bloch, Leon Romanovsky, Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Linus Torvalds
From: Huy Nguyen <redacted>
During the initial setup, the ets command is sent to firmware
without checking if the HCA supports ets. This causes the invalid
command error. Add the ets capiblity check before sending firmware
command to initialize ets settings.
Fixes: e207b7e99176 ("net/mlx5e: ConnectX-4 firmware support for DCBX")
Signed-off-by: Huy Nguyen <redacted>
Signed-off-by: Saeed Mahameed <redacted>
---
drivers/net/ethernet/mellanox/mlx5/core/en_dcbnl.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_dcbnl.c b/drivers/net/ethernet/mellanox/mlx5/core/en_dcbnl.c
index 7f6c225..f0b460f 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/en_dcbnl.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en_dcbnl.c@@ -723,6 +723,9 @@ static void mlx5e_ets_init(struct mlx5e_priv *priv) int i; struct ieee_ets ets; + if (!MLX5_CAP_GEN(priv->mdev, ets)) + return; + memset(&ets, 0, sizeof(ets)); ets.ets_cap = mlx5_max_tc(priv->mdev) + 1; for (i = 0; i < ets.ets_cap; i++) {
--
2.7.4