[PATCH v2 1/2] can: rcar_can: Add r8a7796 support
From: Chris Paterson <hidden>
Date: 2016-11-24 16:11:56
Also in:
linux-can, linux-devicetree, linux-renesas-soc
Subsystem:
can network drivers, open firmware and flattened device tree bindings, the rest · Maintainers:
Marc Kleine-Budde, Vincent Mailhol, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds
Signed-off-by: Chris Paterson <redacted> Reviewed-by: Geert Uytterhoeven <redacted> Acked-by: Marc Kleine-Budde <redacted> --- Documentation/devicetree/bindings/net/can/rcar_can.txt | 12 +++++++----- 1 file changed, 7 insertions(+), 5 deletions(-)
diff --git a/Documentation/devicetree/bindings/net/can/rcar_can.txt b/Documentation/devicetree/bindings/net/can/rcar_can.txt
index 8d40ab2..06bb7cc 100644
--- a/Documentation/devicetree/bindings/net/can/rcar_can.txt
+++ b/Documentation/devicetree/bindings/net/can/rcar_can.txt@@ -10,6 +10,7 @@ Required properties: "renesas,can-r8a7793" if CAN controller is a part of R8A7793 SoC. "renesas,can-r8a7794" if CAN controller is a part of R8A7794 SoC. "renesas,can-r8a7795" if CAN controller is a part of R8A7795 SoC. + "renesas,can-r8a7796" if CAN controller is a part of R8A7796 SoC. "renesas,rcar-gen1-can" for a generic R-Car Gen1 compatible device. "renesas,rcar-gen2-can" for a generic R-Car Gen2 compatible device. "renesas,rcar-gen3-can" for a generic R-Car Gen3 compatible device.
@@ -24,11 +25,12 @@ Required properties: - pinctrl-0: pin control group to be used for this controller. - pinctrl-names: must be "default". -Required properties for "renesas,can-r8a7795" compatible: -In R8A7795 SoC, "clkp2" can be CANFD clock. This is a div6 clock and can be -used by both CAN and CAN FD controller at the same time. It needs to be scaled -to maximum frequency if any of these controllers use it. This is done using -the below properties. +Required properties for "renesas,can-r8a7795" and "renesas,can-r8a7796" +compatible: +In R8A7795 and R8A7796 SoCs, "clkp2" can be CANFD clock. This is a div6 clock +and can be used by both CAN and CAN FD controller at the same time. It needs to +be scaled to maximum frequency if any of these controllers use it. This is done +using the below properties: - assigned-clocks: phandle of clkp2(CANFD) clock. - assigned-clock-rates: maximum frequency of this clock.
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html