Re: [PATCH v2] net/phy/vitesse: Configure RGMII skew on VSC8601, if needed

On 11/16/2016 05:50 AM, Andrew Lunn wrote:

On Wed, Nov 16, 2016 at 01:02:33AM -0800, Alexandru Gagniuc wrote:

quoted

With RGMII, we need a 1.5 to 2ns skew between clock and data lines. The
VSC8601 can handle this internally. While the VSC8601 can set more
fine-grained delays, the standard skew settings work out of the box.
The same heuristic is used to determine when this skew should be enabled
as in vsc824x_config_init().

+/* This adds a skew for both TX and RX clocks, so the skew should only be
+ * applied to "rgmii-id" interfaces. It may not work as expected
+ * on "rgmii-txid", "rgmii-rxid" or "rgmii" interfaces. */

Hi Alexandru

You should be able to make "rgmii" work as expected. If that is the
phy mode, disable the skew.

And that's exactly the implemented behavior. See vsc8601_config_init() 
below.

Alex