Re: [PATCH 1/2] Documentation: devicetree: Add bindings info for rfkill-regulator

From
Rob Herring <robh@kernel.org>
Date
2016-11-09 18:26:18
Also in
linux-devicetree, linux-wireless, lkml
Reply to
Paul Cercueil, 2016-11-01
On Tue, Nov 01, 2016 at 11:58:39AM +0100, Paul Cercueil wrote:
quoted hunk ↗ jump to hunk
This document gives information about how to write a devicetree
node that corresponds to the rfkill-regulator driver.

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
---
 .../devicetree/bindings/net/rfkill-regulator.txt       | 18 ++++++++++++++++++
 1 file changed, 18 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/net/rfkill-regulator.txt
diff --git a/Documentation/devicetree/bindings/net/rfkill-regulator.txt b/Documentation/devicetree/bindings/net/rfkill-regulator.txt
new file mode 100644
index 0000000..aac2fe1
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/rfkill-regulator.txt
@@ -0,0 +1,18 @@
+Device tree bindings for the rfkill-regulator driver
+
+Required properties:
+  - compatible:	should be "rfkill-regulator"
+  - rfkill-name:	the name of this rfkill device
+  - rfkill-type:	the type of this rfkill device;
+			must correspond to a valid rfkill_type from <uapi/linux/rfkill.h>
+  - vrfkill-supply:	phandle to a regulator
My understanding is it is generally felt that using the regulator enable 
GPIO commonly found on WiFi chips for rfkill is an abuse of rfkill as it 
is more that just an RF disable. From a DT standpoint, this seems like 
creating a binding for what a Linux driver wants. Instead, I think this 
should be either a GPIO or GPIO regulator and the driver for the WiFi 
chip should decide whether or not to register that as an rfkill driver.

Rob
Thread (3 messages) 3 messages, 2 authors, last reply 2016-11-09
Keyboard shortcuts
hback out one level
jnext message in thread / next series-diff position
kprevious message in thread / previous series-diff position
ldrill in
Escclose help / fold thread tree
?toggle this help