Re: [PATCH resend] ethtool: add register dump support for fjes driver
From: John W. Linville <hidden>
Date: 2016-11-23 15:00:16
On Wed, Nov 16, 2016 at 09:55:32AM +0900, Taku Izumi wrote:
This patch adds the register dump format for FUJITSU Extended Network device like the following: # ethtool -d es0 0x0000: OWNER_EPID (Owner EPID) 0x00000001 0x0004: MAX_EP (Maximum EP) 0x00000008 0x0010: DCTL (Device Control) 0x00000000 0x0020: CR (Command request) 0x80000002 0x0024: CS (Command status) 0x80000002 0x0028: SHSTSAL (Share status address Low) 0xE8215304 0x002C: SHSTSAH (Share status address High) 0x00000007 0x0034: REQBL (Request Buffer length) 0x00008028 0x0038: REQBAL (Request Buffer Address Low) 0xEB0A0000 0x003C: REQBAH (Request Buffer Address High) 0x00000007 0x0044: RESPBL (Response Buffer Length) 0x00000018 0x0048: RESPBAL (Response Buffer Address Low) 0xE41E1220 0x004C: RESPBAH (Response Buffer Address High) 0x00000007 0x0080: IS (Interrupt status) 0x00000000 0x0084: IMS (Interrupt mask set) 0x7FE00000 0x0088: IMC (Interrupt mask clear) 0x001F0000 0x008C: IG (Interrupt generator) 0x00010000 0x0090: ICTL (Interrupt control) 0x00000000 Signed-off-by: Taku Izumi <redacted>
Thank you, Taku Izumi. I have merged this patch and will be pushing it shortly. I apologize for the delay. John -- John W. Linville Someday the world will need a hero, and you linville@tuxdriver.com might be all we have. Be ready.