Thread (1 message) 1 message, 1 author, 2016-10-04

Re: [PATCH v5 net-next] net: phy: Add Edge-rate driver for Microsemi PHYs.

From: Raju Lakkaraju <hidden>
Date: 2016-10-04 10:03:45
Also in: linux-devicetree

Hi Andrew,

Thank you for comments. I will fix and send the patch.

Thanks,
Raju.

On Tue, Oct 04, 2016 at 08:54:01AM +0200, Andrew Lunn wrote:
EXTERNAL EMAIL


On Tue, Oct 04, 2016 at 12:48:59AM -0400, David Miller wrote:
quoted
From: Raju Lakkaraju <Raju.Lakkaraju-dzo6w/eZyo2tG0bUXCXiUA@public.gmane.org>
Date: Mon, 3 Oct 2016 12:53:13 +0530
quoted
From: Raju Lakkaraju <Raju.Lakkaraju-dzo6w/eZyo2tG0bUXCXiUA@public.gmane.org>

Edge-rate:
As system and networking speeds increase, a signal's output transition,
also know as the edge rate or slew rate (V/ns), takes on greater importance
because high-speed signals come with a price. That price is an assortment of
interference problems like ringing on the line, signal overshoot and
undershoot, extended signal settling times, crosstalk noise, transmission
line reflections, false signal detection by the receiving device and
electromagnetic interference (EMI) -- all of which can negate the potential
gains designers are seeking when they try to increase system speeds through
the use of higher performance logic devices. The fact is, faster signaling
edge rates can cause a higher level of electrical noise or other type of
interference that can actually lead to slower line speeds and lower maximum
system frequencies. This parameter allow the board designers to change the
driving strange, and thereby change the EMI behavioral.

Edge-rate parameters (vddmac, edge-slowdown) get from Device Tree.

Tested on Beaglebone Black with VSC 8531 PHY.

Signed-off-by: Raju Lakkaraju <Raju.Lakkaraju-dzo6w/eZyo2tG0bUXCXiUA@public.gmane.org>
Applied, thanks.
Oh dear. It was not ready for acceptance yet. I guess you missed all
the discussion because it was attached to the previous version of the
patch.

Raju you now need to submit fixup patches relative to the version
David has accepted, to fix the issues we were discussing.
Accepted.
      Andrew
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help