Re: [RFC 3/6] qedi: Add QLogic FastLinQ offload iSCSI driver framework.

On Wed, Oct 19, 2016 at 01:01:10AM -0400, manish.rangankar@cavium.com wrote:

From: Manish Rangankar <redacted>

The QLogic FastLinQ Driver for iSCSI (qedi) is the iSCSI specific module
for 41000 Series Converged Network Adapters by QLogic.

This patch consists of following changes:
  - MAINTAINERS Makefile and Kconfig changes for qedi,
  - PCI driver registration,
  - iSCSI host level initialization,
  - Debugfs and log level infrastructure.

Signed-off-by: Nilesh Javali <redacted>
Signed-off-by: Adheer Chandravanshi <redacted>
Signed-off-by: Chad Dupuis <redacted>
Signed-off-by: Saurav Kashyap <redacted>
Signed-off-by: Arun Easi <redacted>
Signed-off-by: Manish Rangankar <redacted>
---

[...]

+static inline void *qedi_get_task_mem(struct qed_iscsi_tid *info, u32 tid)
+{
+	return (void *)(info->blocks[tid / info->num_tids_per_block] +
+			(tid % info->num_tids_per_block) * info->size);
+}

Unnecessary cast here.


[...]

+void
+qedi_dbg_err(struct qedi_dbg_ctx *qedi, const char *func, u32 line,
+	     const char *fmt, ...)
+{
+	va_list va;
+	struct va_format vaf;
+	char nfunc[32];
+
+	memset(nfunc, 0, sizeof(nfunc));
+	memcpy(nfunc, func, sizeof(nfunc) - 1);
+
+	va_start(va, fmt);
+
+	vaf.fmt = fmt;
+	vaf.va = &va;
+
+	if (likely(qedi) && likely(qedi->pdev))
+		pr_crit("[%s]:[%s:%d]:%d: %pV", dev_name(&qedi->pdev->dev),
+			nfunc, line, qedi->host_no, &vaf);
+	else
+		pr_crit("[0000:00:00.0]:[%s:%d]: %pV", nfunc, line, &vaf);

pr_crit, seriously?

[...]

+static void qedi_int_fp(struct qedi_ctx *qedi)
+{
+	struct qedi_fastpath *fp;
+	int id;
+
+	memset((void *)qedi->fp_array, 0, MIN_NUM_CPUS_MSIX(qedi) *
+	       sizeof(*qedi->fp_array));
+	memset((void *)qedi->sb_array, 0, MIN_NUM_CPUS_MSIX(qedi) *
+	       sizeof(*qedi->sb_array));

I don't think the cast is necessary here.

[...]

+static int qedi_setup_cid_que(struct qedi_ctx *qedi)
+{
+	int i;
+
+	qedi->cid_que.cid_que_base = kmalloc((qedi->max_active_conns *
+					      sizeof(u32)), GFP_KERNEL);
+	if (!qedi->cid_que.cid_que_base)
+		return -ENOMEM;
+
+	qedi->cid_que.conn_cid_tbl = kmalloc((qedi->max_active_conns *
+					      sizeof(struct qedi_conn *)),
+					     GFP_KERNEL);

Please use kmalloc_array() here.

[...]

+/* MSI-X fastpath handler code */
+static irqreturn_t qedi_msix_handler(int irq, void *dev_id)
+{
+	struct qedi_fastpath *fp = dev_id;
+	struct qedi_ctx *qedi = fp->qedi;
+	bool wake_io_thread = true;
+
+	qed_sb_ack(fp->sb_info, IGU_INT_DISABLE, 0);
+
+process_again:
+	wake_io_thread = qedi_process_completions(fp);
+	if (wake_io_thread) {
+		QEDI_INFO(&qedi->dbg_ctx, QEDI_LOG_DISC,
+			  "process already running\n");
+	}
+
+	if (qedi_fp_has_work(fp) == 0)
+		qed_sb_update_sb_idx(fp->sb_info);
+
+	/* Check for more work */
+	rmb();
+
+	if (qedi_fp_has_work(fp) == 0)
+		qed_sb_ack(fp->sb_info, IGU_INT_ENABLE, 1);
+	else
+		goto process_again;
+
+	return IRQ_HANDLED;
+}

You might want to consider workqueues here.

[...]

+static int qedi_alloc_itt(struct qedi_ctx *qedi)
+{
+	qedi->itt_map = kzalloc((sizeof(struct qedi_itt_map) *
+				MAX_ISCSI_TASK_ENTRIES), GFP_KERNEL);

that screams for kcalloc()

+	if (!qedi->itt_map) {
+		QEDI_ERR(&qedi->dbg_ctx,
+			 "Unable to allocate itt map array memory\n");
+		return -ENOMEM;
+	}
+	return 0;
+}
+
+static void qedi_free_itt(struct qedi_ctx *qedi)
+{
+	kfree(qedi->itt_map);
+}
+
+static struct qed_ll2_cb_ops qedi_ll2_cb_ops = {
+	.rx_cb = qedi_ll2_rx,
+	.tx_cb = NULL,
+};
+
+static int qedi_percpu_io_thread(void *arg)
+{
+	struct qedi_percpu_s *p = arg;
+	struct qedi_work *work, *tmp;
+	unsigned long flags;
+	LIST_HEAD(work_list);
+
+	set_user_nice(current, -20);
+
+	while (!kthread_should_stop()) {
+		spin_lock_irqsave(&p->p_work_lock, flags);
+		while (!list_empty(&p->work_list)) {
+			list_splice_init(&p->work_list, &work_list);
+			spin_unlock_irqrestore(&p->p_work_lock, flags);
+
+			list_for_each_entry_safe(work, tmp, &work_list, list) {
+				list_del_init(&work->list);
+				qedi_fp_process_cqes(work->qedi, &work->cqe,
+						     work->que_idx);
+				kfree(work);
+			}
+			spin_lock_irqsave(&p->p_work_lock, flags);
+		}
+		set_current_state(TASK_INTERRUPTIBLE);
+		spin_unlock_irqrestore(&p->p_work_lock, flags);
+		schedule();
+	}
+	__set_current_state(TASK_RUNNING);
+
+	return 0;
+}

A kthread with prio -20 IRQs turned off looping over a list, what could
possibly go wrong here. I bet you your favorite beverage that this will
cause Soft Lockups when running I/O stress tests BTDT.

[...]

+	if (mode != QEDI_MODE_RECOVERY) {
+		if (iscsi_host_add(qedi->shost, &pdev->dev)) {
+			QEDI_ERR(&qedi->dbg_ctx,
+				 "Could not add iscsi host\n");
+			rc = -ENOMEM;
+			goto remove_host;
+		}
+
+		/* Allocate uio buffers */
+		rc = qedi_alloc_uio_rings(qedi);
+		if (rc) {
+			QEDI_ERR(&qedi->dbg_ctx,
+				 "UIO alloc ring failed err=%d\n", rc);
+			goto remove_host;
+		}
+
+		rc = qedi_init_uio(qedi);
+		if (rc) {
+			QEDI_ERR(&qedi->dbg_ctx,
+				 "UIO init failed, err=%d\n", rc);
+			goto free_uio;
+		}
+
+		/* host the array on iscsi_conn */
+		rc = qedi_setup_cid_que(qedi);
+		if (rc) {
+			QEDI_ERR(&qedi->dbg_ctx,
+				 "Could not setup cid que\n");
+			goto free_uio;
+		}
+
+		rc = qedi_cm_alloc_mem(qedi);
+		if (rc) {
+			QEDI_ERR(&qedi->dbg_ctx,
+				 "Could not alloc cm memory\n");
+			goto free_cid_que;
+		}
+
+		rc = qedi_alloc_itt(qedi);
+		if (rc) {
+			QEDI_ERR(&qedi->dbg_ctx,
+				 "Could not alloc itt memory\n");
+			goto free_cid_que;
+		}
+
+		sprintf(host_buf, "host_%d", qedi->shost->host_no);
+		qedi->tmf_thread = create_singlethread_workqueue(host_buf);
+		if (!qedi->tmf_thread) {
+			QEDI_ERR(&qedi->dbg_ctx,
+				 "Unable to start tmf thread!\n");
+			rc = -ENODEV;
+			goto free_cid_que;
+		}
+
+		sprintf(host_buf, "qedi_ofld%d", qedi->shost->host_no);
+		qedi->offload_thread = create_workqueue(host_buf);
+		if (!qedi->offload_thread) {
+			QEDI_ERR(&qedi->dbg_ctx,
+				 "Unable to start offload thread!\n");
+			rc = -ENODEV;
+			goto free_cid_que;
+		}
+
+		/* F/w needs 1st task context memory entry for performance */
+		set_bit(QEDI_RESERVE_TASK_ID, qedi->task_idx_map);
+		atomic_set(&qedi->num_offloads, 0);
+	}
+
+	QEDI_INFO(&qedi->dbg_ctx, QEDI_LOG_INFO,
+		  "QLogic FastLinQ iSCSI Module qedi %s, FW %d.%d.%d.%d\n",
+		  QEDI_MODULE_VERSION, FW_MAJOR_VERSION, FW_MINOR_VERSION,
+		   FW_REVISION_VERSION, FW_ENGINEERING_VERSION);
+	return 0;

Please put the QEDI_INFO() above the if and invert the condition.


Thanks,
	Johannes
-- 
Johannes Thumshirn                                          Storage
jthumshirn@suse.de                                +49 911 74053 689
SUSE LINUX GmbH, Maxfeldstr. 5, 90409 Nürnberg
GF: Felix Imendörffer, Jane Smithard, Graham Norton
HRB 21284 (AG Nürnberg)
Key fingerprint = EC38 9CAB C2C4 F25D 8600 D0D0 0393 969D 2D76 0850