[PATCH net 2/2] net: dsa: bcm_sf2: Do not rely on kexec_in_progress
From: Florian Fainelli <f.fainelli@gmail.com>
Date: 2016-10-21 21:22:30
Also in:
kexec, lkml
Subsystem:
broadcom b53/sf2 ethernet switch driver, networking drivers, networking [dsa], the rest · Maintainers:
Florian Fainelli, Jonas Gorski, Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Andrew Lunn, Vladimir Oltean, Linus Torvalds
After discussing with Eric, it turns out that, while using
kexec_in_progress is a nice optimization, which prevents us from always
powering on the integrated PHY, let's just turn it on in the shutdown
path.
This removes a dependency on kexec_in_progress which, according to Eric
should not be used by modules
Fixes: 2399d6143f85 ("net: dsa: bcm_sf2: Prevent GPHY shutdown for kexec'd kernels")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
drivers/net/dsa/bcm_sf2.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/drivers/net/dsa/bcm_sf2.c b/drivers/net/dsa/bcm_sf2.c
index 077a24541584..e3ee27ce13dd 100644
--- a/drivers/net/dsa/bcm_sf2.c
+++ b/drivers/net/dsa/bcm_sf2.c@@ -30,7 +30,6 @@ #include <linux/etherdevice.h> #include <net/switchdev.h> #include <linux/platform_data/b53.h> -#include <linux/kexec.h> #include "bcm_sf2.h" #include "bcm_sf2_regs.h"
@@ -1141,9 +1140,11 @@ static void bcm_sf2_sw_shutdown(struct platform_device *pdev) /* For a kernel about to be kexec'd we want to keep the GPHY on for a * successful MDIO bus scan to occur. If we did turn off the GPHY * before (e.g: port_disable), this will also power it back on. + * + * Do not rely on kexec_in_progress, just power the PHY on. */ if (priv->hw_params.num_gphy == 1) - bcm_sf2_gphy_enable_set(priv->dev->ds, kexec_in_progress); + bcm_sf2_gphy_enable_set(priv->dev->ds, true); } #ifdef CONFIG_PM_SLEEP
--
2.7.4