[PATCH net 5/7] qede: Reconfigure rss indirection direction table when rss count is updated
From: <hidden>
Date: 2016-10-21 09:30:01
Subsystem:
networking drivers, qlogic ql4xxx ethernet driver, the rest · Maintainers:
Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Linus Torvalds
From: Sudarsana Reddy Kalluru <redacted> Rx indirection table entries are in the range [0, (rss_count - 1)]. If user reduces the rss count, the table entries may not be in the ccorrect range. Need to reconfigure the table with new rss_count as a basis. Signed-off-by: Sudarsana Reddy Kalluru <redacted> Signed-off-by: Yuval Mintz <redacted> --- drivers/net/ethernet/qlogic/qede/qede_ethtool.c | 7 +++++++ 1 file changed, 7 insertions(+)
diff --git a/drivers/net/ethernet/qlogic/qede/qede_ethtool.c b/drivers/net/ethernet/qlogic/qede/qede_ethtool.c
index 7da184c..d47bdaa 100644
--- a/drivers/net/ethernet/qlogic/qede/qede_ethtool.c
+++ b/drivers/net/ethernet/qlogic/qede/qede_ethtool.c@@ -822,6 +822,13 @@ static int qede_set_channels(struct net_device *dev, edev->req_queues = count; edev->req_num_tx = channels->tx_count; edev->req_num_rx = channels->rx_count; + /* Reset the indirection table if rx queue count is updated */ + if ((edev->req_queues - edev->req_num_tx) != QEDE_RSS_COUNT(edev)) { + edev->rss_params_inited &= ~QEDE_RSS_INDIR_INITED; + memset(&edev->rss_params.rss_ind_table, 0, + sizeof(edev->rss_params.rss_ind_table)); + } + if (netif_running(dev)) qede_reload(edev, NULL, NULL);
--
1.8.3.1