[PATCH net-next 8/8] net/faraday: Stop NCSI device on shutdown
flat view
STALE3687d
SUPERSEDED: 1 (1M)
From: Gavin Shan <hidden>
Date: 2016-09-29 05:03:23
Subsystem:
networking drivers, the rest · Maintainers:
Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Linus Torvalds
Status: Superseded by v2 (posted 2016-10-04). [go to v2]
Revision v1 (2 revisions archived); 1 review trailer.
Revisions (2)
- v1 current
- v2 [diff against previous]
This stops NCSI device when closing the network device so that the
NCSI device can be reenabled later.
Signed-off-by: Gavin Shan <redacted>
Reviewed-by: Joel Stanley <joel@jms.id.au>
---
drivers/net/ethernet/faraday/ftgmac100.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/net/ethernet/faraday/ftgmac100.c b/drivers/net/ethernet/faraday/ftgmac100.c
index 90f9c54..2625872 100644
--- a/drivers/net/ethernet/faraday/ftgmac100.c
+++ b/drivers/net/ethernet/faraday/ftgmac100.c@@ -1190,6 +1190,8 @@ static int ftgmac100_stop(struct net_device *netdev) napi_disable(&priv->napi); if (netdev->phydev) phy_stop(netdev->phydev); + else if (priv->use_ncsi) + ncsi_stop_dev(priv->ndev); ftgmac100_stop_hw(priv); free_irq(priv->irq, netdev);
--
2.1.0