Re: MDB offloading of local ipv4 multicast groups

On Thu, Sep 15, 2016 at 08:58:50PM +0200, John Crispin wrote:

Hi,

While adding MDB support to the qca8k dsa driver I found that ipv4 mcast
groups don't always get propagated to the dsa driver. In my setup there
are 2 clients connected to the switch, both running a mdns client. The
.port_mdb_add() callback is properly called for 33:33:00:00:00:FB but
01:00:5E:00:00:FB never got propagated to the dsa driver.

The reason is that the call to ipv4_is_local_multicast() here [1] will
return true and the notifier is never called. Is this intentional or is
there something missing in the code ?

Hi John

I've not looked too deeply at this yet, but here is my take on how it
should work.

By default, the switch needs to flood all multicast traffic from any
port in a bridge, to all other ports in a bridge, including the host.

Adding an mdb entry allows you to reduce where such flooding should
occur, i.e. it allows you to implement IGMP snooping and block traffic
going out a port when you know there is nobody interested in the
traffic on that port.

	Andrew