Re: [PATCH 2/2] net/smsc911x: Move interrupt allocation to open/stop

 static inline u32 __smsc911x_reg_read(struct smsc911x_data *pdata, u32 reg)
 {
 	if (pdata->config.flags & SMSC911X_USE_32BIT)

@@ -1514,6 +1516,7 @@ static int smsc911x_open(struct net_device *dev)
 	unsigned int temp;
 	unsigned int intcfg;
 	int retval;
+	int irq_flags;
 
 	/* find and start the given phy */
 	if (!dev->phydev) {

@@ -1584,6 +1587,14 @@ static int smsc911x_open(struct net_device *dev)
 	pdata->software_irq_signal = 0;
 	smp_wmb();
 
+	irq_flags = irq_get_trigger_type(dev->irq);
+	if (request_irq(dev->irq, smsc911x_irqhandler,
+			irq_flags | IRQF_SHARED, dev->name, dev)) {
+		SMSC_WARN(pdata, probe,
+			  "Unable to claim requested irq: %d", dev->irq);
+		goto mii_free_out;
+	}
+
 	temp = smsc911x_reg_read(pdata, INT_EN);
 	temp |= INT_EN_SW_INT_EN_;
 	smsc911x_reg_write(pdata, INT_EN, temp);

@@ -1599,7 +1610,7 @@ static int smsc911x_open(struct net_device *dev)
 		netdev_warn(dev, "ISR failed signaling test (IRQ %d)\n",
 			    dev->irq);
 		retval = -ENODEV;
-		goto mii_free_out;
+		goto irq_stop_out;
 	}
 	SMSC_TRACE(pdata, ifup, "IRQ handler passed test using IRQ %d",
 		   dev->irq);

@@ -1645,7 +1656,8 @@ static int smsc911x_open(struct net_device *dev)
 
 	netif_start_queue(dev);
 	return 0;
-
+irq_stop_out:
+	free_irq(dev->irq, dev);
 mii_free_out:
 	phy_disconnect(dev->phydev);
 	dev->phydev = NULL;

@@ -1672,12 +1684,15 @@ static int smsc911x_stop(struct net_device *dev)
 	dev->stats.rx_dropped += smsc911x_reg_read(pdata, RX_DROP);
 	smsc911x_tx_update_txcounters(dev);
 
+	free_irq(dev->irq, dev);
+
 	/* Bring the PHY down */
 	if (dev->phydev) {
 		phy_stop(dev->phydev);
 		phy_disconnect(dev->phydev);
 		dev->phydev = NULL;
 	}
+	netif_carrier_off(dev);

@@ -2479,38 +2491,18 @@ static int smsc911x_drv_probe(struct platform_device *pdev)
 	if (retval < 0)
 		goto out_disable_resources;
 
-	/* configure irq polarity and type before connecting isr */
-	if (pdata->config.irq_polarity == SMSC911X_IRQ_POLARITY_ACTIVE_HIGH)
-		intcfg |= INT_CFG_IRQ_POL_;
-
-	if (pdata->config.irq_type == SMSC911X_IRQ_TYPE_PUSH_PULL)
-		intcfg |= INT_CFG_IRQ_TYPE_;
-
-	smsc911x_reg_write(pdata, INT_CFG, intcfg);