[PATCH net 2/3] qed: Set selection-field while configuring the app entry in ieee mode.
From: Sudarsana Reddy Kalluru <sudarsana.kalluru@qlogic.com>
Date: 2016-08-29 13:13:44
Subsystem:
networking drivers, qlogic ql4xxx ethernet driver, the rest · Maintainers:
Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Linus Torvalds
Management firmware requires the selection-field (SF) to be set for configuring the application/protocol entry in IEEE mode. Without this setting, the app entry will be configured incorrectly in MFW. Signed-off-by: Sudarsana Reddy Kalluru <sudarsana.kalluru@qlogic.com> Signed-off-by: Yuval Mintz <redacted> --- drivers/net/ethernet/qlogic/qed/qed_dcbx.c | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/qlogic/qed/qed_dcbx.c b/drivers/net/ethernet/qlogic/qed/qed_dcbx.c
index 7ad1667..192a886 100644
--- a/drivers/net/ethernet/qlogic/qed/qed_dcbx.c
+++ b/drivers/net/ethernet/qlogic/qed/qed_dcbx.c@@ -1063,23 +1063,31 @@ qed_dcbx_set_app_data(struct qed_hwfn *p_hwfn, for (i = 0; i < DCBX_MAX_APP_PROTOCOL; i++) { entry = &p_app->app_pri_tbl[i].entry; if (ieee) { - *entry &= ~DCBX_APP_SF_IEEE_MASK; + *entry &= ~(DCBX_APP_SF_IEEE_MASK | DCBX_APP_SF_MASK); switch (p_params->app_entry[i].sf_ieee) { case QED_DCBX_SF_IEEE_ETHTYPE: *entry |= ((u32)DCBX_APP_SF_IEEE_ETHTYPE << DCBX_APP_SF_IEEE_SHIFT); + *entry |= ((u32)DCBX_APP_SF_ETHTYPE << + DCBX_APP_SF_SHIFT); break; case QED_DCBX_SF_IEEE_TCP_PORT: *entry |= ((u32)DCBX_APP_SF_IEEE_TCP_PORT << DCBX_APP_SF_IEEE_SHIFT); + *entry |= ((u32)DCBX_APP_SF_PORT << + DCBX_APP_SF_SHIFT); break; case QED_DCBX_SF_IEEE_UDP_PORT: *entry |= ((u32)DCBX_APP_SF_IEEE_UDP_PORT << DCBX_APP_SF_IEEE_SHIFT); + *entry |= ((u32)DCBX_APP_SF_PORT << + DCBX_APP_SF_SHIFT); break; case QED_DCBX_SF_IEEE_TCP_UDP_PORT: *entry |= ((u32)DCBX_APP_SF_IEEE_TCP_UDP_PORT << DCBX_APP_SF_IEEE_SHIFT); + *entry |= ((u32)DCBX_APP_SF_PORT << + DCBX_APP_SF_SHIFT); break; } } else {
--
1.8.3.1