[PATCH net 02/10] net/mlx5e: Optimization for MTU change
From: Saeed Mahameed <hidden>
Date: 2016-08-19 01:43:15
Subsystem:
mellanox ethernet driver (mlx5e), mellanox mlx5 core vpi driver, networking drivers, the rest · Maintainers:
Saeed Mahameed, Tariq Toukan, Mark Bloch, Leon Romanovsky, Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Linus Torvalds
From: Tariq Toukan <redacted>
Avoid unnecessary interface down/up operations upon an MTU change
when it does not affect the rings configuration.
Fixes: 461017cb006a ("net/mlx5e: Support RX multi-packet WQE (Striding RQ)")
Signed-off-by: Tariq Toukan <redacted>
Signed-off-by: Saeed Mahameed <redacted>
---
drivers/net/ethernet/mellanox/mlx5/core/en_main.c | 9 +++++++--
1 file changed, 7 insertions(+), 2 deletions(-)
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c
index 0fc3a2b..65258b2 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c@@ -2569,6 +2569,7 @@ static int mlx5e_change_mtu(struct net_device *netdev, int new_mtu) u16 max_mtu; u16 min_mtu; int err = 0; + bool reset; mlx5_query_port_max_mtu(mdev, &max_mtu, 1);
@@ -2584,14 +2585,18 @@ static int mlx5e_change_mtu(struct net_device *netdev, int new_mtu) mutex_lock(&priv->state_lock); + reset = !priv->params.lro_en && + (priv->params.rq_wq_type != + MLX5_WQ_TYPE_LINKED_LIST_STRIDING_RQ); + was_opened = test_bit(MLX5E_STATE_OPENED, &priv->state); - if (was_opened) + if (was_opened && reset) mlx5e_close_locked(netdev); netdev->mtu = new_mtu; mlx5e_set_dev_port_mtu(netdev); - if (was_opened) + if (was_opened && reset) err = mlx5e_open_locked(netdev); mutex_unlock(&priv->state_lock);
--
2.7.4