[net 4/6] ixgbe: Force VLNCTRL.VFE to be set in all VMDq paths
From: Jeff Kirsher <hidden>
Date: 2016-08-16 20:40:18
Subsystem:
intel ethernet drivers, networking drivers, the rest · Maintainers:
Tony Nguyen, Przemek Kitszel, Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Linus Torvalds
From: Alexander Duyck <redacted>
When I was adding the code for enabling VLAN promiscuous mode with SR-IOV
enabled I had inadvertently left the VLNCTRL.VFE bit unchanged as I has
assumed there was code in another path that was setting it when we enabled
SR-IOV. This wasn't the case and as a result we were just disabling VLAN
filtering for all the VFs apparently.
Also the previous patches were always clearing CFIEN which was always set
to 0 by the hardware anyway so I am dropping the redundant bit clearing.
Fixes: 16369564915a ("ixgbe: Add support for VLAN promiscuous with SR-IOV")
Signed-off-by: Alexander Duyck <redacted>
Tested-by: Andrew Bowers <redacted>
Signed-off-by: Jeff Kirsher <redacted>
---
drivers/net/ethernet/intel/ixgbe/ixgbe_main.c | 18 ++++++++++++------
1 file changed, 12 insertions(+), 6 deletions(-)
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
index 5418c69a..e0fdef8 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c@@ -4100,6 +4100,8 @@ static void ixgbe_vlan_promisc_enable(struct ixgbe_adapter *adapter) struct ixgbe_hw *hw = &adapter->hw; u32 vlnctrl, i; + vlnctrl = IXGBE_READ_REG(hw, IXGBE_VLNCTRL); + switch (hw->mac.type) { case ixgbe_mac_82599EB: case ixgbe_mac_X540:
@@ -4112,8 +4114,7 @@ static void ixgbe_vlan_promisc_enable(struct ixgbe_adapter *adapter) /* fall through */ case ixgbe_mac_82598EB: /* legacy case, we can just disable VLAN filtering */ - vlnctrl = IXGBE_READ_REG(hw, IXGBE_VLNCTRL); - vlnctrl &= ~(IXGBE_VLNCTRL_VFE | IXGBE_VLNCTRL_CFIEN); + vlnctrl &= ~IXGBE_VLNCTRL_VFE; IXGBE_WRITE_REG(hw, IXGBE_VLNCTRL, vlnctrl); return; }
@@ -4125,6 +4126,10 @@ static void ixgbe_vlan_promisc_enable(struct ixgbe_adapter *adapter) /* Set flag so we don't redo unnecessary work */ adapter->flags2 |= IXGBE_FLAG2_VLAN_PROMISC; + /* For VMDq and SR-IOV we must leave VLAN filtering enabled */ + vlnctrl |= IXGBE_VLNCTRL_VFE; + IXGBE_WRITE_REG(hw, IXGBE_VLNCTRL, vlnctrl); + /* Add PF to all active pools */ for (i = IXGBE_VLVF_ENTRIES; --i;) { u32 reg_offset = IXGBE_VLVFB(i * 2 + VMDQ_P(0) / 32);
@@ -4191,6 +4196,11 @@ static void ixgbe_vlan_promisc_disable(struct ixgbe_adapter *adapter) struct ixgbe_hw *hw = &adapter->hw; u32 vlnctrl, i; + /* Set VLAN filtering to enabled */ + vlnctrl = IXGBE_READ_REG(hw, IXGBE_VLNCTRL); + vlnctrl |= IXGBE_VLNCTRL_VFE; + IXGBE_WRITE_REG(hw, IXGBE_VLNCTRL, vlnctrl); + switch (hw->mac.type) { case ixgbe_mac_82599EB: case ixgbe_mac_X540:
@@ -4202,10 +4212,6 @@ static void ixgbe_vlan_promisc_disable(struct ixgbe_adapter *adapter) break; /* fall through */ case ixgbe_mac_82598EB: - vlnctrl = IXGBE_READ_REG(hw, IXGBE_VLNCTRL); - vlnctrl &= ~IXGBE_VLNCTRL_CFIEN; - vlnctrl |= IXGBE_VLNCTRL_VFE; - IXGBE_WRITE_REG(hw, IXGBE_VLNCTRL, vlnctrl); return; }
--
2.7.4