alexmcwhirter@triadic.us writes:

On 2016-07-26 09:59, Christian Lamparter wrote:

quoted

Thanks, I gave the program a try with my WNDA3100 and a WN821N v2
devices.
I did not see any corruptions in any of the tests though. Can you
tell me
something about your wireless network too? I would like to know what
router
and firmware are you using? Also important: what's your wireless
configuration?
(WPA?, CCMP or TKIP? HT40, HT20 or Legacy rates? ...)

Probably the quickest and easiest way to get that information is by
running
the following commands as root, when you are connected to your wifi
network
and post the results:
# iw dev wlan0 link
# iw dev wlan0 scan dump

(You can of course remove your device's MACs, but please do it
consistently).

Regards,
Christian

I wonder if this is something that is only affecting certain NIC's?
For example, it see this issue on sun4u boxes with tigon3 and hme
interfaces. But on my sun4v boxes that have e1000 interfaces
everything works fine.

Kernel configuration might also make a difference. Trying to find an
Kconfig option which affects this could be useful.

-- 
Kalle Valo