Re: [PATCH v2 3/5] ARM: sun8i: dt: Add DT bindings documentation for Allwinner sun8i-emac
From: Rob Herring <hidden>
Date: 2016-07-20 19:15:37
Also in:
linux-arm-kernel, linux-devicetree, lkml
On Wed, Jul 20, 2016 at 10:03:18AM +0200, LABBE Corentin wrote:
quoted hunk ↗ jump to hunk
This patch adds documentation for Device-Tree bindings for the Allwinner sun8i-emac driver. Signed-off-by: LABBE Corentin <redacted> --- .../bindings/net/allwinner,sun8i-emac.txt | 65 ++++++++++++++++++++++ 1 file changed, 65 insertions(+) create mode 100644 Documentation/devicetree/bindings/net/allwinner,sun8i-emac.txtdiff --git a/Documentation/devicetree/bindings/net/allwinner,sun8i-emac.txt b/Documentation/devicetree/bindings/net/allwinner,sun8i-emac.txt new file mode 100644 index 0000000..4bf4e53 --- /dev/null +++ b/Documentation/devicetree/bindings/net/allwinner,sun8i-emac.txt@@ -0,0 +1,65 @@ +* Allwinner sun8i EMAC ethernet controller + +Required properties: +- compatible: "allwinner,sun8i-a83t-emac", "allwinner,sun8i-h3-emac", + or "allwinner,sun50i-a64-emac"
List one per line.
+- reg: address and length of the register sets for the device. +- reg-names: should be "emac" and "syscon", matching the register sets +- interrupts: interrupt for the device +- clocks: A phandle to the reference clock for this device +- clock-names: should be "ahb" +- resets: A phandle to the reset control for this device +- reset-names: should be "ahb" +- phy-mode: See ethernet.txt +- phy or phy-handle: See ethernet.txt +- #address-cells: shall be 1 +- #size-cells: shall be 0 + +"allwinner,sun8i-h3-emac" also requires: +- clocks: an extra phandle to the reference clock for the EPHY +- clock-names: an extra "ephy" entry matching the clocks property +- resets: an extra phandle to the reset control for the EPHY +- resets-names: an extra "ephy" entry matching the resets property + +See ethernet.txt in the same directory for generic bindings for ethernet +controllers. + +The device node referenced by "phy" or "phy-handle" should be a child node +of this node. See phy.txt for the generic PHY bindings. + +Optional properties: +- phy-supply: phandle to a regulator if the PHY needs one +- phy-io-supply: phandle to a regulator if the PHY needs a another one for I/O. + This is sometimes found with RGMII PHYs, which use a second + regulator for the lower I/O voltage.
I previously said these should go in the phy node, and you said you would remove them. Rob