Thread (8 messages) 8 messages, 6 authors, 2016-07-15

Re: [PATCH 2/3] net: smsc911x: request and deassert optional RESET GPIO

From: Guenter Roeck <linux@roeck-us.net>
Date: 2016-07-08 13:53:08

On 07/08/2016 02:07 AM, Linus Walleij wrote:
quoted hunk ↗ jump to hunk
On some systems (such as the Qualcomm APQ8060 Dragonboard) the
RESET signal of the SMSC911x is not pulled up by a resistor but
connected to a GPIO line, so that the operating system must
explicitly deassert RESET before use.

Support this in the SMSC911x driver so this ethernet connector
can be used on such targets.

Signed-off-by: Linus Walleij <redacted>
---
  drivers/net/ethernet/smsc/smsc911x.c | 13 +++++++++++++
  1 file changed, 13 insertions(+)
diff --git a/drivers/net/ethernet/smsc/smsc911x.c b/drivers/net/ethernet/smsc/smsc911x.c
index 8af25563f627..125d58ac22bd 100644
--- a/drivers/net/ethernet/smsc/smsc911x.c
+++ b/drivers/net/ethernet/smsc/smsc911x.c
@@ -62,6 +62,7 @@
  #include <linux/acpi.h>
  #include <linux/pm_runtime.h>
  #include <linux/property.h>
+#include <linux/gpio/consumer.h>

  #include "smsc911x.h"
@@ -149,6 +150,9 @@ struct smsc911x_data {
  	/* regulators */
  	struct regulator_bulk_data supplies[SMSC911X_NUM_SUPPLIES];

+	/* Reset GPIO */
+	struct gpio_desc *reset_gpiod;
+
  	/* clock */
  	struct clk *clk;
  };
@@ -440,6 +444,15 @@ static int smsc911x_request_resources(struct platform_device *pdev)
  		netdev_err(ndev, "couldn't get regulators %d\n",
  				ret);

+	/* Request optional RESET GPIO */
+	pdata->reset_gpiod = devm_gpiod_get(&pdev->dev, "reset",
+					    GPIOD_OUT_HIGH);
+	/* Deassert the signal */
+	if (!IS_ERR(pdata->reset_gpiod)) {
This could return -EPROBE_DEFER, which should probably not be ignored.

It might be better to use devm_gpiod_get_optional(). If you pass GPIOD_OUT_LOW
as parameter to that function, it should take the chip out of reset immediately.
See drivers/i2c/muxes/i2c-mux-pca954x.c for an example with a similar use case.

Guenter
+		dev_info(&pdev->dev, "release reset\n");
+		gpiod_set_value(pdata->reset_gpiod, 0);
+	}
+
  	/* Request clock */
  	pdata->clk = clk_get(&pdev->dev, NULL);
  	if (IS_ERR(pdata->clk))
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help