[PATCH net-next RFT] net: fec: handle small PHY reset durations more precisely
From: Stefan Wahren <hidden>
Date: 2016-06-08 20:42:46
Also in:
linux-arm-kernel
Subsystem:
freescale imx / mxc fec driver, networking drivers, the rest · Maintainers:
Wei Fang, Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Linus Torvalds
Since msleep is based on jiffies the PHY reset could take longer than expected. So use msleep for values greater than 20 msec otherwise usleep_range. Signed-off-by: Stefan Wahren <redacted> --- drivers/net/ethernet/freescale/fec_main.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/freescale/fec_main.c b/drivers/net/ethernet/freescale/fec_main.c
index 3c0255e..49f8055 100644
--- a/drivers/net/ethernet/freescale/fec_main.c
+++ b/drivers/net/ethernet/freescale/fec_main.c@@ -3191,7 +3191,12 @@ static void fec_reset_phy(struct platform_device *pdev) dev_err(&pdev->dev, "failed to get phy-reset-gpios: %d\n", err); return; } - msleep(msec); + + if (msec > 20) + msleep(msec); + else + usleep_range(msec * 1000, msec * 1000 + 1000); + gpio_set_value_cansleep(phy_reset, !active_high); } #else /* CONFIG_OF */
--
1.7.9.5