[PATCH net-next 3/3] r8152: save the speed
From: Hayes Wang <hidden>
Date: 2016-06-13 09:50:17
Also in:
lkml
Subsystem:
networking drivers, the rest, usb networking drivers · Maintainers:
Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Linus Torvalds
The user may change the speed. Use it to replace the default one. Signed-off-by: Hayes Wang <redacted> --- drivers/net/usb/r8152.c | 16 +++++++++++++--- 1 file changed, 13 insertions(+), 3 deletions(-)
diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c
index dcdc4fa..69d1bbfd 100644
--- a/drivers/net/usb/r8152.c
+++ b/drivers/net/usb/r8152.c@@ -628,8 +628,11 @@ struct r8152 { u32 tx_qlen; u32 coalesce; u16 ocp_base; + u16 speed; u8 *intr_buff; u8 version; + u8 duplex; + u8 autoneg; }; enum rtl_version {
@@ -3051,9 +3054,7 @@ static void rtl_hw_phy_work_func_t(struct work_struct *work) tp->rtl_ops.hw_phy_cfg(tp); - rtl8152_set_speed(tp, AUTONEG_ENABLE, - tp->mii.supports_gmii ? SPEED_1000 : SPEED_100, - DUPLEX_FULL); + rtl8152_set_speed(tp, tp->autoneg, tp->speed, tp->duplex); mutex_unlock(&tp->control);
@@ -3679,6 +3680,11 @@ static int rtl8152_set_settings(struct net_device *dev, struct ethtool_cmd *cmd) mutex_lock(&tp->control); ret = rtl8152_set_speed(tp, cmd->autoneg, cmd->speed, cmd->duplex); + if (!ret) { + tp->autoneg = cmd->autoneg; + tp->speed = cmd->speed; + tp->duplex = cmd->duplex; + } mutex_unlock(&tp->control);
@@ -4239,6 +4245,10 @@ static int rtl8152_probe(struct usb_interface *intf, break; } + tp->autoneg = AUTONEG_ENABLE; + tp->speed = tp->mii.supports_gmii ? SPEED_1000 : SPEED_100; + tp->duplex = DUPLEX_FULL; + intf->needs_remote_wakeup = 1; tp->rtl_ops.init(tp);
--
2.4.11