[PATCH] phy: marvell: fix LED configuration via marvell,reg-init
From: Clemens Gruber <hidden>
Date: 2016-06-11 15:21:33
Also in:
lkml
Subsystem:
ethernet phy library, networking drivers, the rest · Maintainers:
Andrew Lunn, Heiner Kallweit, Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Linus Torvalds
Configuring the PHY LED registers for the Marvell 88E1510 and others is not possible, because regardless of the values in marvell,reg-init, it is later overridden in m88e1121_config_aneg with a non-standard default. This patch moves that default configuration to .config_init to allow setting the LED configuration through marvell,reg-init in the device tree, which should override said default if it exists. Signed-off-by: Clemens Gruber <redacted> --- drivers/net/phy/marvell.c | 38 ++++++++++++++++++++++++++------------ 1 file changed, 26 insertions(+), 12 deletions(-)
diff --git a/drivers/net/phy/marvell.c b/drivers/net/phy/marvell.c
index 280e879..79ccc11 100644
--- a/drivers/net/phy/marvell.c
+++ b/drivers/net/phy/marvell.c@@ -407,15 +407,7 @@ static int m88e1121_config_aneg(struct phy_device *phydev) if (err < 0) return err; - oldpage = phy_read(phydev, MII_MARVELL_PHY_PAGE); - - phy_write(phydev, MII_MARVELL_PHY_PAGE, MII_88E1121_PHY_LED_PAGE); - phy_write(phydev, MII_88E1121_PHY_LED_CTRL, MII_88E1121_PHY_LED_DEF); - phy_write(phydev, MII_MARVELL_PHY_PAGE, oldpage); - - err = genphy_config_aneg(phydev); - - return err; + return genphy_config_aneg(phydev); } static int m88e1318_config_aneg(struct phy_device *phydev)
@@ -636,6 +628,28 @@ static int m88e1111_config_init(struct phy_device *phydev) return phy_write(phydev, MII_BMCR, BMCR_RESET); } +static int m88e1121_config_init(struct phy_device *phydev) +{ + int err, oldpage; + + oldpage = phy_read(phydev, MII_MARVELL_PHY_PAGE); + + err = phy_write(phydev, MII_MARVELL_PHY_PAGE, MII_88E1121_PHY_LED_PAGE); + if (err < 0) + return err; + + /* Default PHY LED config: LED[0] .. Link, LED[1] .. Activity */ + err = phy_write(phydev, MII_88E1121_PHY_LED_CTRL, + MII_88E1121_PHY_LED_DEF); + if (err < 0) + return err; + + phy_write(phydev, MII_MARVELL_PHY_PAGE, oldpage); + + /* Set marvell,reg-init configuration from device tree */ + return marvell_config_init(phydev); +} + static int m88e1510_config_init(struct phy_device *phydev) { int err;
@@ -668,7 +682,7 @@ static int m88e1510_config_init(struct phy_device *phydev) return err; } - return marvell_config_init(phydev); + return m88e1121_config_init(phydev); } static int m88e1118_config_aneg(struct phy_device *phydev)
@@ -1196,7 +1210,7 @@ static struct phy_driver marvell_drivers[] = { .features = PHY_GBIT_FEATURES, .flags = PHY_HAS_INTERRUPT, .probe = marvell_probe, - .config_init = &marvell_config_init, + .config_init = &m88e1121_config_init, .config_aneg = &m88e1121_config_aneg, .read_status = &marvell_read_status, .ack_interrupt = &marvell_ack_interrupt,
@@ -1215,7 +1229,7 @@ static struct phy_driver marvell_drivers[] = { .features = PHY_GBIT_FEATURES, .flags = PHY_HAS_INTERRUPT, .probe = marvell_probe, - .config_init = &marvell_config_init, + .config_init = &m88e1121_config_init, .config_aneg = &m88e1318_config_aneg, .read_status = &marvell_read_status, .ack_interrupt = &marvell_ack_interrupt,
--
2.8.3