[PATCH V4 3/4] net-next: mediatek: add fixed-phy support
From: John Crispin <hidden>
Date: 2016-06-03 08:18:11
Also in:
linux-mediatek, lkml
Subsystem:
mediatek ethernet driver, networking drivers, the rest · Maintainers:
Felix Fietkau, Lorenzo Bianconi, Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Linus Torvalds
The MT7623 SoC has a builtin gigabit switch. If we want to use it, GMAC1 needs to be configured using a fixed link speed and flow control settings. The easiest way to do this is to used the fixed-phy driver, allowing us to reuse the existing mdio polling code to setup the MAC. Reviewed-by: Andrew Lunn <redacted> Signed-off-by: John Crispin <redacted> --- drivers/net/ethernet/mediatek/mtk_eth_soc.c | 3 +++ 1 file changed, 3 insertions(+)
diff --git a/drivers/net/ethernet/mediatek/mtk_eth_soc.c b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
index b0652f6..231d284 100644
--- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c
+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c@@ -229,6 +229,9 @@ static int mtk_phy_connect(struct mtk_mac *mac) u32 val, ge_mode; np = of_parse_phandle(mac->of_node, "phy-handle", 0); + if (!np && of_phy_is_fixed_link(mac->of_node)) + if (!of_phy_register_fixed_link(mac->of_node)) + np = of_node_get(mac->of_node); if (!np) return -ENODEV;
--
1.7.10.4