From: Serey Kong <redacted>

When a Direct Attach (DA) cable is used, if the i40e_set_settings
function is called it would return an error. Add the DA type so
the function won't fail.

Change-ID: I2b802f27a5d91cfefa72fd1f852acb4d74647a8e
Signed-off-by: Serey Kong <redacted>
Tested-by: Andrew Bowers <redacted>
Signed-off-by: Jeff Kirsher <redacted>
---
 drivers/net/ethernet/intel/i40e/i40e_ethtool.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/net/ethernet/intel/i40e/i40e_ethtool.c b/drivers/net/ethernet/intel/i40e/i40e_ethtool.c
index 5e8d84f..8381dab 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_ethtool.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_ethtool.c

@@ -663,6 +663,7 @@ static int i40e_set_settings(struct net_device *netdev,
 	if (hw->phy.media_type != I40E_MEDIA_TYPE_BASET &&
 	    hw->phy.media_type != I40E_MEDIA_TYPE_FIBER &&
 	    hw->phy.media_type != I40E_MEDIA_TYPE_BACKPLANE &&
+	    hw->phy.media_type != I40E_MEDIA_TYPE_DA &&
 	    hw->phy.link_info.link_info & I40E_AQ_LINK_UP)
 		return -EOPNOTSUPP;
 

-- 
2.5.5