Re: 4.5.0 on sun7i-a20-olinuxino-lime2: libphy: PHY stmmac-0:ffffffff not found (regression from rc7)

Hello

On 5/20/2016 9:56 AM, Marc Zyngier wrote:

On 20/05/16 06:44, Andre Heider wrote:

quoted

Giuseppe, Alexandre, et al.,

On Thu, Mar 17, 2016 at 8:52 AM, Marc Zyngier [off-list ref] wrote:

quoted

On Thu, 17 Mar 2016 00:56:40 +0100
Bert Lindner [off-list ref] wrote:

quoted

On 2016-03-16 18:42, Marc Zyngier wrote:

quoted

On 16/03/16 15:10, Bert Lindner wrote:

quoted

On 2016-03-16 14:10, Andreas Färber wrote:

quoted

Am 16.03.2016 um 13:09 schrieb Robin Murphy:

quoted

On 16/03/16 11:39, Marc Zyngier wrote:

quoted

On 16/03/16 11:19, Bert Lindner wrote:

...

quoted

quoted

quoted

quoted

quoted

quoted

quoted

quoted

For the board sun7i-a20-olinuxino-lime2, there seems to be a problem
with the eth0 PHY in mainline kernel 4.5.0 that developed since
4.5.0-rc7. Ethernet does not work, although eth0 is reported:

...

quoted

quoted

quoted

quoted

quoted

quoted

quoted

quoted

[    9.767125] NET: Registered protocol family 10
[   10.357405] libphy: PHY stmmac-0:ffffffff not found
[   10.362382] eth0: Could not attach to PHY
[   10.366557] stmmac_open: Cannot attach to PHY (error: -19)

...

quoted

quoted

quoted

quoted

quoted

v4 fixes for 4.5 are here:

https://patchwork.ozlabs.org/patch/598195/ (revert)
https://patchwork.ozlabs.org/patch/598196/

...

quoted

quoted

quoted

Good to know, thanks. Could you also give the potential fix a go (as
mentioned by Andreas)? Just to make sure that whatever gets merged next
will actually fix the issue.

Yes sure, it took a while because I had to travel. Confirmed, the
v4-for-4.5 fix works well for me, on sun7i-a20-olinuxino-lime2:

root@lime2-079f:~# cat /proc/version
Linux version 4.5.0-598195-598196-v4 (root@lime2-079f) (gcc version
4.9.1 (Ubuntu/Linaro 4.9.1-16ubuntu6) ) #1 SMP Wed Mar 16 16:44:22 UTC 2016

dmesg:
[    8.245273] NET: Registered protocol family 10
[    9.297406]  RX IPC Checksum Offload disabled
[    9.297460]  No MAC Management Counters available
[    9.297951] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   16.285658] sun7i-dwmac 1c50000.ethernet eth0: Link is Up -
1Gbps/Full - flow control rx/tx
[   16.285798] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready

The board is connected to my laptop rather than to a switch, so that
might be where the flow control message comes from (not sure). Anyway
ethernet works.

Cool, many thanks for taking the time to test and report.

Hopefully Giuseppe will get this merged quickly enough in mainline, and
it should then trickle into a 4.5-stable release (cc-ing stable on
these patches would probably be a good idea, BTW).

stmmac is broken on at least Lime2, BananaPi and Cubieboard2 since
v4.5 [0], including all five stable releases :(

All the A20 platforms are dead, actually.

quoted

The v4.5 patches quoted above are already +4 weeks old, could we
please get them into stable?

For that, the maintainer would have needed to CC stable, which he
didn't. I'd expect someone who cares to send these patches to stable.
It'd be better if the maintainer would do it himself though.

sure, I can send the patches to stable (sorry if I missed to add
stable ML on CC).

Andre, I have not clear if the train of patches actually fix the
issue or if you need my support to fix something else. In that case
I need some input for debugging (e.g. kernel log).

let me know, is it enough to re-send the patches only?

Regards
Peppe

Thanks,

	M.

-- 
You received this message because you are subscribed to the Google Groups "linux-sunxi" group.
To unsubscribe from this group and stop receiving emails from it, send an email to linux-sunxi+unsubscribe-/JYPxA39Uh5TLH3MbocFF+G/Ez6ZCGd0@public.gmane.org
For more options, visit https://groups.google.com/d/optout.