Thread (24 messages) flat view 24 messages, 3 authors, 2016-05-09
STALE3764d

Revision v2 of 3 in this series.

Revisions (3)
  1. rfc [diff vs current]
  2. v1 [diff vs current]
  3. v2 current

[PATCH net-next v2 18/21] net: dsa: mv88e6131: drop frames priorities setup

From: Vivien Didelot <hidden>
Date: 2016-05-09 17:25:08
Also in: lkml
Subsystem: networking drivers, networking [dsa], the rest · Maintainers: Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Andrew Lunn, Vladimir Oltean, Linus Torvalds

6131 is the only driver which setups the priority of IGMP/MLD snoop
frames and ARP frames to the highest setting. Drop such change until we
figure out a common configuration for all switch models.

Signed-off-by: Vivien Didelot <redacted>
---
 drivers/net/dsa/mv88e6131.c | 18 ------------------
 1 file changed, 18 deletions(-)
diff --git a/drivers/net/dsa/mv88e6131.c b/drivers/net/dsa/mv88e6131.c
index b6ca07b..da28327 100644
--- a/drivers/net/dsa/mv88e6131.c
+++ b/drivers/net/dsa/mv88e6131.c
@@ -58,20 +58,6 @@ static const char *mv88e6131_drv_probe(struct device *dsa_dev,
 				   ARRAY_SIZE(mv88e6131_table));
 }
 
-static int mv88e6131_setup_global(struct dsa_switch *ds)
-{
-	struct mv88e6xxx_priv_state *ps = ds_to_priv(ds);
-
-	/* Force the priority of IGMP/MLD snoop frames and ARP frames
-	 * to the highest setting.
-	 */
-	return mv88e6xxx_reg_write(ps, REG_GLOBAL2, GLOBAL2_PRIO_OVERRIDE,
-				   GLOBAL2_PRIO_OVERRIDE_FORCE_SNOOP |
-				   7 << GLOBAL2_PRIO_OVERRIDE_SNOOP_SHIFT |
-				   GLOBAL2_PRIO_OVERRIDE_FORCE_ARP |
-				   7 << GLOBAL2_PRIO_OVERRIDE_ARP_SHIFT);
-}
-
 static int mv88e6131_setup(struct dsa_switch *ds)
 {
 	struct mv88e6xxx_priv_state *ps = ds_to_priv(ds);
@@ -83,10 +69,6 @@ static int mv88e6131_setup(struct dsa_switch *ds)
 	if (ret < 0)
 		return ret;
 
-	ret = mv88e6131_setup_global(ds);
-	if (ret < 0)
-		return ret;
-
 	return mv88e6xxx_setup_ports(ds);
 }
 
-- 
2.8.2
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help