[PATCH V2 13/22] net-next: mediatek: increase watchdog_timeo
From: John Crispin <john@phrozen.org>
Date: 2016-05-09 10:40:55
Also in:
linux-mediatek
Subsystem:
mediatek ethernet driver, networking drivers, the rest · Maintainers:
Felix Fietkau, Lorenzo Bianconi, Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Linus Torvalds
During stress testing, after reducing the threshold value, we have seen TX timeouts that were caused by the watchdog_timeo value being too low. Increase the value to 5 * HZ which is a value commonly used by many other drivers. Signed-off-by: John Crispin <john@phrozen.org> --- drivers/net/ethernet/mediatek/mtk_eth_soc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/mediatek/mtk_eth_soc.c b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
index 984788a..3ece159 100644
--- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c
+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c@@ -1706,7 +1706,7 @@ static int mtk_add_mac(struct mtk_eth *eth, struct device_node *np) mac->hw_stats->reg_offset = id * MTK_STAT_OFFSET; SET_NETDEV_DEV(eth->netdev[id], eth->dev); - eth->netdev[id]->watchdog_timeo = HZ; + eth->netdev[id]->watchdog_timeo = 5 * HZ; eth->netdev[id]->netdev_ops = &mtk_netdev_ops; eth->netdev[id]->base_addr = (unsigned long)eth->base; eth->netdev[id]->vlan_features = MTK_HW_FEATURES &
--
1.7.10.4