[patch net 2/2] mlxsw: spectrum: Add missing rollback in flood configuration
flat view
STALE3818d
SUPERSEDED
From: Jiri Pirko <jiri@resnulli.us>
Date: 2016-05-06 20:18:45
Subsystem:
mellanox ethernet switch drivers, networking drivers, the rest · Maintainers:
Ido Schimmel, Petr Machata, Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Linus Torvalds
Revision v1 of 25 in this series.
Revisions (25)
From: Ido Schimmel <redacted>
When we fail to set the flooding configuration for the broadcast and
unregistered multicast traffic, we should revert the flooding
configuration of the unknown unicast traffic.
Fixes: 0293038e0c36 ("mlxsw: spectrum: Add support for flood control")
Signed-off-by: Ido Schimmel <redacted>
Signed-off-by: Jiri Pirko <redacted>
---
drivers/net/ethernet/mellanox/mlxsw/spectrum_switchdev.c | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/drivers/net/ethernet/mellanox/mlxsw/spectrum_switchdev.c b/drivers/net/ethernet/mellanox/mlxsw/spectrum_switchdev.c
index e1c74ef..9cd6f47 100644
--- a/drivers/net/ethernet/mellanox/mlxsw/spectrum_switchdev.c
+++ b/drivers/net/ethernet/mellanox/mlxsw/spectrum_switchdev.c@@ -214,7 +214,15 @@ static int __mlxsw_sp_port_flood_set(struct mlxsw_sp_port *mlxsw_sp_port, mlxsw_reg_sftr_pack(sftr_pl, MLXSW_SP_FLOOD_TABLE_BM, idx_begin, table_type, range, local_port, set); err = mlxsw_reg_write(mlxsw_sp->core, MLXSW_REG(sftr), sftr_pl); + if (err) + goto err_flood_bm_set; + else + goto buffer_out; +err_flood_bm_set: + mlxsw_reg_sftr_pack(sftr_pl, MLXSW_SP_FLOOD_TABLE_UC, idx_begin, + table_type, range, local_port, !set); + mlxsw_reg_write(mlxsw_sp->core, MLXSW_REG(sftr), sftr_pl); buffer_out: kfree(sftr_pl); return err;
--
2.5.5