[PATCH 1/3] net: thunderx: Cleanup PHY probing code.
flat view
STALE3874d
SUPERSEDED
From: David Daney <hidden>
Date: 2016-03-11 16:48:05
Also in:
linux-arm-kernel, lkml
Subsystem:
arm/cavium thunder network driver, networking drivers, the rest · Maintainers:
Sunil Goutham, Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Linus Torvalds
Revision v1 of 2 in this series.
Revisions (2)
- v1 current
- v2 [diff vs current]
From: David Daney <redacted> Remove the call to force the octeon-mdio driver to be loaded. Allow the standard driver loading mechanisms to load the PHY drivers, and use -EPROBE_DEFER to cause the BGX driver to be probed only after the PHY drivers are available. Reorder the setting of MAC addresses and PHY probing to allow BGX LMACs with no attached PHY to still be assigned a MAC address. Signed-off-by: David Daney <redacted> --- drivers/net/ethernet/cavium/thunder/thunder_bgx.c | 31 ++++++++++++----------- 1 file changed, 16 insertions(+), 15 deletions(-)
diff --git a/drivers/net/ethernet/cavium/thunder/thunder_bgx.c b/drivers/net/ethernet/cavium/thunder/thunder_bgx.c
index f8abdff..928c02b 100644
--- a/drivers/net/ethernet/cavium/thunder/thunder_bgx.c
+++ b/drivers/net/ethernet/cavium/thunder/thunder_bgx.c@@ -978,27 +978,31 @@ static int bgx_init_of_phy(struct bgx *bgx) const char *mac; device_for_each_child_node(&bgx->pdev->dev, fwn) { + struct phy_device *pd; struct device_node *phy_np; struct device_node *node = to_of_node(fwn); - /* If it is not an OF node we cannot handle it yet, so - * exit the loop. - */ - if (!node) - break; - - phy_np = of_parse_phandle(node, "phy-handle", 0); - if (!phy_np) - continue; - - bgx->lmac[lmac].phydev = of_phy_find_device(phy_np); - mac = of_get_mac_address(node); if (mac) ether_addr_copy(bgx->lmac[lmac].mac, mac); SET_NETDEV_DEV(&bgx->lmac[lmac].netdev, &bgx->pdev->dev); bgx->lmac[lmac].lmacid = lmac; + + phy_np = of_parse_phandle(node, "phy-handle", 0); + /* If there is no phy or defective firmware presents + * this cortina phy, for which there is no driver + * support, ignore it. + */ + if (phy_np && + !of_device_is_compatible(phy_np, "cortina,cs4223-slice")) { + /* Wait until the phy drivers are available */ + pd = of_phy_find_device(phy_np); + if (!pd) + return -EPROBE_DEFER; + bgx->lmac[lmac].phydev = pd; + } + lmac++; if (lmac == MAX_LMAC_PER_BGX) { of_node_put(node);
@@ -1032,9 +1036,6 @@ static int bgx_probe(struct pci_dev *pdev, const struct pci_device_id *ent) struct bgx *bgx = NULL; u8 lmac; - /* Load octeon mdio driver */ - octeon_mdiobus_force_mod_depencency(); - bgx = devm_kzalloc(dev, sizeof(*bgx), GFP_KERNEL); if (!bgx) return -ENOMEM;
--
1.7.11.7