Re: [PATCH] at803x: fix reset handling
From: David Miller <davem@davemloft.net>
Date: 2016-03-23 17:40:19
From: Sergei Shtylyov <redacted> Date: Wed, 23 Mar 2016 00:44:40 +0300
The driver of course "knows" that the chip's reset signal is active low,
so it drives the GPIO to 0 to reset the PHY and to 1 otherwise; however
all this will only work iff the GPIO is specified as active-high in the
device tree! I think both the driver and the device trees (if there are
any -- I was unable to find them) need to be fixed in this case...
Fixes: 13a56b449325 ("net: phy: at803x: Add support for hardware reset")
Signed-off-by: Sergei Shtylyov <redacted>Applied.