[PATCH] Add support to control PHY LEDs

Hi all,

We had a requirement to disable the PHY link LEDs during system
standby mode without turning off the ethernet module. To achieve that,
I have prepared the sysfs interface turn on/off the PHY link LEDs.

Please suggest if there is any better way to achieve this.

Thanks,
Vishal

Vishal Thanki (1):
  net: phy: at803x: Add support to control PHY LEDs

 drivers/net/phy/Kconfig  |  7 +++++
 drivers/net/phy/at803x.c | 71 ++++++++++++++++++++++++++++++++++++++++++++++++
 2 files changed, 78 insertions(+)

-- 
2.4.3