Re: [PATCH/RFC v5 net-next] ravb: Add dma queue interrupt support

From
Sergei Shtylyov <hidden>
Date
2016-03-02 18:42:17
Also in
linux-sh
Reply to
Yoshihiro Kaneko, 2016-03-02
Hello.

On 03/02/2016 09:32 PM, Yoshihiro Kaneko wrote:
quoted
quoted
quoted
quoted
From: Kazuya Mizuguchi <redacted>

This patch supports the following interrupts.

- One interrupt for multiple (error, gPTP)
- One interrupt for emac
- Four interrupts for dma queue (best effort rx/tx, network control
rx/tx)

This patch improve efficiency of the interrupt handler by adding the
interrupt handler corresponding to each interrupt source described
above. Additionally, it reduces the number of times of the access to
EthernetAVB IF.
Also this patch prevent this driver depends on the whim of a boot
loader.

[ykaneko0929@gmail.com: define bit names of registers]
[ykaneko0929@gmail.com: add comment for gen3 only registers]
[ykaneko0929@gmail.com: fix coding style]
[ykaneko0929@gmail.com: update changelog]
[ykaneko0929@gmail.com: gen3: fix initialization of interrupts]
[ykaneko0929@gmail.com: gen3: fix clearing interrupts]
[ykaneko0929@gmail.com: gen3: add helper function for request_irq()]
[ykaneko0929@gmail.com: revert ravb_close() and ravb_ptp_stop()]
[ykaneko0929@gmail.com: avoid calling free_irq() to non-hooked
interrupts]
[ykaneko0929@gmail.com: make NC/BE interrupt handler a function]
Signed-off-by: Kazuya Mizuguchi <redacted>
Signed-off-by: Yoshihiro Kaneko <redacted>
[...]
quoted
quoted
quoted
quoted
diff --git a/drivers/net/ethernet/renesas/ravb_main.c
b/drivers/net/ethernet/renesas/ravb_main.c
index c936682..1bec71e 100644
--- a/drivers/net/ethernet/renesas/ravb_main.c
+++ b/drivers/net/ethernet/renesas/ravb_main.c
[...]
quoted
quoted
quoted
quoted
@@ -725,31 +787,15 @@ static irqreturn_t ravb_interrupt(int irq, void
*dev_id)

                  /* Network control and best effort queue RX/TX */
                  for (q = RAVB_NC; q >= RAVB_BE; q--) {
-                       if (((ris0 & ric0) & BIT(q)) ||
-                           ((tis  & tic)  & BIT(q))) {
-                               if (napi_schedule_prep(&priv->napi[q]))
{
-                                       /* Mask RX and TX interrupts */
-                                       ric0 &= ~BIT(q);
-                                       tic &= ~BIT(q);
-                                       ravb_write(ndev, ric0, RIC0);
-                                       ravb_write(ndev, tic, TIC);
-                                       __napi_schedule(&priv->napi[q]);
-                               } else {
-                                       netdev_warn(ndev,
-                                                   "ignoring interrupt,
rx status 0x%08x, rx mask 0x%08x,\n",
-                                                   ris0, ric0);
-                                       netdev_warn(ndev,
-                                                   "
tx status 0x%08x, tx mask 0x%08x.\n",
-                                                   tis, tic);
-                               }
+                       if (ravb_nc_be_interrupt(ndev, q, ris0, &ric0,
tis,
+                                                &tic))
                                  result = IRQ_HANDLED;
-                       }
                  }
     Unroll this *for* loop please...
OK.
    It was a bad idea actually, sorry...
OK, I will revert this part.
(But I think it is not that bad...)
   I think the loop will scale better if we ever support the AVB queues...

[...]
quoted
quoted
quoted
quoted
@@ -767,6 +813,73 @@ static irqreturn_t ravb_interrupt(int irq, void
[...]
quoted
quoted
quoted
quoted
+static irqreturn_t ravb_dmaq_interrupt(int irq, void *dev_id, int
ravb_queue)
     Perhaps, ravb_rx_tx_interrupt()?
Agreed.
    And we still have ravb_dma_interrupt() unused, right?
Do you mean that there is an unused "ravb_dma_interrupt()" in this version?
I probably be misunderstanding something.
   No, I meant that this name isn't used yet.
quoted
[...]
Thanks,
kaneko
MBR, Sergei
Thread (6 messages) 6 messages, 2 authors, last reply 2016-03-02
Keyboard shortcuts
hback out one level
jnext message in thread / next series-diff position
kprevious message in thread / previous series-diff position
ldrill in
Escclose help / fold thread tree
?toggle this help