[PATCH net-next V2 01/16] net: fec: only check queue 0 if RXF_0/TXF_0 interrupt is set
From: Troy Kisky <hidden>
Date: 2016-02-25 00:36:44
Also in:
linux-arm-kernel
Subsystem:
freescale imx / mxc fec driver, networking drivers, the rest · Maintainers:
Wei Fang, Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Linus Torvalds
Before queue 0 was always checked if any queue caused an interrupt. It is better to just mark queue 0 if queue 0 has caused an interrupt. Signed-off-by: Troy Kisky <redacted> --- drivers/net/ethernet/freescale/fec_main.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/net/ethernet/freescale/fec_main.c b/drivers/net/ethernet/freescale/fec_main.c
index bad0ba2..dbac975 100644
--- a/drivers/net/ethernet/freescale/fec_main.c
+++ b/drivers/net/ethernet/freescale/fec_main.c@@ -1534,14 +1534,14 @@ fec_enet_collect_events(struct fec_enet_private *fep, uint int_events) if (int_events == 0) return false; - if (int_events & FEC_ENET_RXF) + if (int_events & FEC_ENET_RXF_0) fep->work_rx |= (1 << 2); if (int_events & FEC_ENET_RXF_1) fep->work_rx |= (1 << 0); if (int_events & FEC_ENET_RXF_2) fep->work_rx |= (1 << 1); - if (int_events & FEC_ENET_TXF) + if (int_events & FEC_ENET_TXF_0) fep->work_tx |= (1 << 2); if (int_events & FEC_ENET_TXF_1) fep->work_tx |= (1 << 0);
--
2.5.0