[PATCH net-next V2 2/8] net: fec: fix rx error counts
From: Troy Kisky <hidden>
Date: 2016-02-05 21:52:44
Also in:
linux-arm-kernel
Subsystem:
freescale imx / mxc fec driver, networking drivers, the rest · Maintainers:
Wei Fang, Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Linus Torvalds
On an overrun, the other flags are not valid, so don't check them. Also, don't pass bad frames up the stack. Signed-off-by: Troy Kisky <redacted> --- drivers/net/ethernet/freescale/fec_main.c | 36 +++++++++++++------------------ 1 file changed, 15 insertions(+), 21 deletions(-)
diff --git a/drivers/net/ethernet/freescale/fec_main.c b/drivers/net/ethernet/freescale/fec_main.c
index 3e5b24a..162fa59 100644
--- a/drivers/net/ethernet/freescale/fec_main.c
+++ b/drivers/net/ethernet/freescale/fec_main.c@@ -1408,37 +1408,31 @@ fec_enet_rx_queue(struct net_device *ndev, int budget, u16 queue_id) break; pkt_received++; - /* Since we have allocated space to hold a complete frame, - * the last indicator should be set. - */ - if ((status & BD_ENET_RX_LAST) == 0) - netdev_err(ndev, "rcv is not +last\n"); - writel(FEC_ENET_RXF, fep->hwp + FEC_IEVENT); /* Check for errors. */ + status ^= BD_ENET_RX_LAST; if (status & (BD_ENET_RX_LG | BD_ENET_RX_SH | BD_ENET_RX_NO | - BD_ENET_RX_CR | BD_ENET_RX_OV)) { + BD_ENET_RX_CR | BD_ENET_RX_OV | BD_ENET_RX_LAST | + BD_ENET_RX_CL)) { ndev->stats.rx_errors++; - if (status & (BD_ENET_RX_LG | BD_ENET_RX_SH)) { + if (status & BD_ENET_RX_OV) { + /* FIFO overrun */ + ndev->stats.rx_fifo_errors++; + goto rx_processing_done; + } + if (status & (BD_ENET_RX_LG | BD_ENET_RX_SH + | BD_ENET_RX_LAST)) { /* Frame too long or too short. */ ndev->stats.rx_length_errors++; + if (status & BD_ENET_RX_LAST) + netdev_err(ndev, "rcv is not +last\n"); } - if (status & BD_ENET_RX_NO) /* Frame alignment */ - ndev->stats.rx_frame_errors++; if (status & BD_ENET_RX_CR) /* CRC Error */ ndev->stats.rx_crc_errors++; - if (status & BD_ENET_RX_OV) /* FIFO overrun */ - ndev->stats.rx_fifo_errors++; - } - - /* Report late collisions as a frame error. - * On this error, the BD is closed, but we don't know what we - * have in the buffer. So, just drop this frame on the floor. - */ - if (status & BD_ENET_RX_CL) { - ndev->stats.rx_errors++; - ndev->stats.rx_frame_errors++; + /* Report late collisions as a frame error. */ + if (status & (BD_ENET_RX_NO | BD_ENET_RX_CL)) + ndev->stats.rx_frame_errors++; goto rx_processing_done; }
--
2.5.0