Hi,
This small set of independent patches tries to fix incorrect
IS_ERR_VALUE macro usage. It fixes most usages leading to errors
as described in [1]. It also follows conclusion from the discussion
[1][2] - IS_ERR_VALUE should be used only with unsigned long type,
signed types should use comparison 'ret < 0'.
The patchset does not fix errors present in net/ethernet/freescale
and soc/fsq/qe drivers - these drivers mixes different types:
dma_addr_t, u32, unsigned long, fixing it properly seems to me more
challenging, maybe maintainers or brave volunteers can look it.
The list of missing fixes:
drivers/net/ethernet/freescale/fs_enet/mac-scc.c:149:36-37: WARNING: incorrect argument type in IS_ERR_VALUE(fep -> ring_mem_addr)
drivers/net/ethernet/freescale/ucc_geth.c:2237:48-49: WARNING: incorrect argument type in IS_ERR_VALUE(ugeth -> tx_bd_ring_offset [ j ])
drivers/net/ethernet/freescale/ucc_geth.c:2314:48-49: WARNING: incorrect argument type in IS_ERR_VALUE(ugeth -> rx_bd_ring_offset [ j ])
drivers/net/ethernet/freescale/ucc_geth.c:2524:44-45: WARNING: incorrect argument type in IS_ERR_VALUE(ugeth -> tx_glbl_pram_offset)
drivers/net/ethernet/freescale/ucc_geth.c:2544:45-46: WARNING: incorrect argument type in IS_ERR_VALUE(ugeth -> thread_dat_tx_offset)
drivers/net/ethernet/freescale/ucc_geth.c:2571:46-47: WARNING: incorrect argument type in IS_ERR_VALUE(ugeth -> send_q_mem_reg_offset)
drivers/net/ethernet/freescale/ucc_geth.c:2612:42-43: WARNING: incorrect argument type in IS_ERR_VALUE(ugeth -> scheduler_offset)
drivers/net/ethernet/freescale/ucc_geth.c:2659:54-55: WARNING: incorrect argument type in IS_ERR_VALUE(ugeth -> tx_fw_statistics_pram_offset)
drivers/net/ethernet/freescale/ucc_geth.c:2696:44-45: WARNING: incorrect argument type in IS_ERR_VALUE(ugeth -> rx_glbl_pram_offset)
drivers/net/ethernet/freescale/ucc_geth.c:2715:45-46: WARNING: incorrect argument type in IS_ERR_VALUE(ugeth -> thread_dat_rx_offset)
drivers/net/ethernet/freescale/ucc_geth.c:2736:54-55: WARNING: incorrect argument type in IS_ERR_VALUE(ugeth -> rx_fw_statistics_pram_offset)
drivers/net/ethernet/freescale/ucc_geth.c:2756:53-54: WARNING: incorrect argument type in IS_ERR_VALUE(ugeth -> rx_irq_coalescing_tbl_offset)
drivers/net/ethernet/freescale/ucc_geth.c:2822:44-45: WARNING: incorrect argument type in IS_ERR_VALUE(ugeth -> rx_bd_qs_tbl_offset)
drivers/net/ethernet/freescale/ucc_geth.c:2908:47-48: WARNING: incorrect argument type in IS_ERR_VALUE(ugeth -> exf_glbl_param_offset)
drivers/net/ethernet/freescale/ucc_geth.c:292:36-37: WARNING: incorrect argument type in IS_ERR_VALUE(init_enet_offset)
drivers/net/ethernet/freescale/ucc_geth.c:3042:39-40: WARNING: incorrect argument type in IS_ERR_VALUE(init_enet_pram_offset)
drivers/soc/fsl/qe/ucc_fast.c:271:60-61: WARNING: incorrect argument type in IS_ERR_VALUE(uccf -> ucc_fast_tx_virtual_fifo_base_offset)
drivers/soc/fsl/qe/ucc_fast.c:284:60-61: WARNING: incorrect argument type in IS_ERR_VALUE(uccf -> ucc_fast_rx_virtual_fifo_base_offset)
drivers/soc/fsl/qe/ucc_slow.c:186:38-39: WARNING: incorrect argument type in IS_ERR_VALUE(uccs -> us_pram_offset)
drivers/soc/fsl/qe/ucc_slow.c:213:38-39: WARNING: incorrect argument type in IS_ERR_VALUE(uccs -> rx_base_offset)
drivers/soc/fsl/qe/ucc_slow.c:224:38-39: WARNING: incorrect argument type in IS_ERR_VALUE(uccs -> tx_base_offset)
drivers/net/ethernet/freescale/fs_enet/mac-fcc.c:110:35-36: WARNING: unknown argument type in IS_ERR_VALUE(fpi -> dpram_offset)
[1]: http://permalink.gmane.org/gmane.linux.kernel/2120927
[2]: http://permalink.gmane.org/gmane.linux.kernel/2150581
28 more lines