Re: [PATCH v2 6/6] dt-bindings: net: ks8995: add bindings documentation for ks8995

On 02/08/2016 07:44 PM, Sergei Shtylyov wrote:

Hello.

On 02/08/2016 08:35 PM, Helmut Buchsbaum wrote:

quoted

Signed-off-by: Helmut Buchsbaum <redacted>
---
  .../devicetree/bindings/net/micrel-ks8995.txt        | 20
++++++++++++++++++++
  1 file changed, 20 insertions(+)
  create mode 100644
Documentation/devicetree/bindings/net/micrel-ks8995.txt

diff --git a/Documentation/devicetree/bindings/net/micrel-ks8995.txt

b/Documentation/devicetree/bindings/net/micrel-ks8995.txt
new file mode 100644
index 0000000..7f11ca6

--- /dev/null
+++ b/Documentation/devicetree/bindings/net/micrel-ks8995.txt

@@ -0,0 +1,20 @@
+Micrel KS8995 SPI controlled Ethernet Switch families
+
+Required properties (according to spi-bus.txt):
+- compatible: either "micrel,ks8995", "micrel,ksz8864" or

"micrel,ksz8795"
+
+Optional properties:
+- reset-gpios : phandle of gpio that will be used to reset chip
during probe
+
+Example:
+
+spi-master {
+    ...
+    ksz8795 {

    ePAPR tells to name the nodes generically, according to their function.

quoted

+        compatible = "micrel,ksz8795";
+
+        reg = <0>;
+        spi-max-frequency = <50000000>;
+        reset-gpios = <&gpio0 46 1>;
+    };
+};

MBR, Sergei

Hello Sergei,

just to avoid any misunderstandings: you refer to ePAPR, ch. 2.2.1 Node 
Names. Your definitely right, I'll correct the naming in my example!

Thanks,
Helmut