Re: [RFC PATCH net] net/core: don't increment rx_dropped on inactive slaves
From: Jarod Wilson <hidden>
Date: 2016-01-26 21:35:34
Also in:
lkml
On Tue, Jan 26, 2016 at 01:24:59PM -0800, Eric Dumazet wrote:
quoted hunk ↗ jump to hunk
On Tue, Jan 26, 2016 at 1:14 PM, Jarod Wilson [off-list ref] wrote:quoted
On Sat, Jan 23, 2016 at 07:23:09AM -0800, Eric Dumazet wrote:quoted
On Fri, 2016-01-22 at 14:11 -0500, Jarod Wilson wrote:quoted
--- net/core/dev.c | 3 +++ 1 file changed, 3 insertions(+)diff --git a/net/core/dev.c b/net/core/dev.c index 8cba3d8..1354c7b 100644 --- a/net/core/dev.c +++ b/net/core/dev.c@@ -4153,8 +4153,11 @@ ncls: else ret = pt_prev->func(skb, skb->dev, pt_prev, orig_dev); } else { + if (deliver_exact) + goto inactive; /* bond or team inactive slave */ drop: atomic_long_inc(&skb->dev->rx_dropped); +inactive: kfree_skb(skb); /* Jamal, now you will not able to escape explaining * me how you were going to use this. :-)Note that if you still have a kfree_skb() instead of consume_skb(), some tools will still give you a wrong signal (packet dropped ...). But then maybe the signal is telling some truth. We receive a packet, and decide to drop it because no one was willing to handle it. Maybe someone wants to know a particular slave receives 10,000 such frames per second and hurts performance with useless work. We should at least increment some counter and maybe dump it with "ethtool -S" or something.I've been digging into ethtool -S a little bit, and am somewhat at a loss as to how I would wire into this. From what I've been able to figure out, it's entirely device-specific-ish counters spit out. On my sfc cards, I get rx_noskb_drops and rx_nodesc_drop_cnt output from ethtool -S, but for the core network stack, these are actually added up and shoved into rx_dropped, and no other network driver has those two individual counters. By itself, rx_dropped isn't output directly anywhere from ethtool, so far as I can see. And ethtool -S bondX shows absolutely nothing. *Should* ethtool -S be dumping all the network core stats? I have to say I was more than a little surprised at this:# ip -s -s link sh dev eth0 15: eth0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast state DOWN mode DEFAULT group default qlen 1000 link/ether 3c:97:0e:be:91:7b brd ff:ff:ff:ff:ff:ff RX: bytes packets errors dropped overrun mcast 0 0 0 0 0 0 RX errors: length crc frame fifo missed 0 0 0 0 0 TX: bytes packets errors dropped carrier collsns 0 0 0 0 0 0 TX errors: aborted fifo window heartbeat 0 0 0 0 So start with the following patch :diff --git a/include/uapi/linux/if_link.h b/include/uapi/linux/if_link.h index a30b78090594..7c762cf1e4d5 100644 --- a/include/uapi/linux/if_link.h +++ b/include/uapi/linux/if_link.h@@ -68,6 +68,8 @@ struct rtnl_link_stats64 { /* for cslip etc */ __u64 rx_compressed; __u64 tx_compressed; + + __u64 rx_nohandler; /* packet was of no interest */ }; /* The struct should be in sync with struct ifmap */
I'm already well past that point, using rx_dropped_inactive as the stat name though, based on the prior discussion. I can certainly convert that over to rx_nohandler easily enough. It looks like adding a column to ip's output there would be as simple as fetching the stat over netlink and spitting it out. -- Jarod Wilson jarod@redhat.com