[PATCH net-next 04/10] ARM: mvebu: add buffer manager nodes to armada-38x.dtsi
From: Gregory CLEMENT <hidden>
Date: 2016-01-12 19:11:21
Also in:
linux-arm-kernel, lkml
Subsystem:
the rest · Maintainer:
Linus Torvalds
From: Marcin Wojtas <redacted> Armada 38x network controller supports hardware buffer management (BM). Since it is now enabled in mvneta driver, appropriate nodes can be added to armada-38x.dtsi - for the actual common BM unit (bm@c8000) and its internal SRAM (bm-bppi), which is used for indirect access to buffer pointer ring residing in DRAM. Pools - ports mapping, bm-bppi entry in 'soc' node's ranges and optional parameters are supposed to be set in board files. Signed-off-by: Marcin Wojtas <redacted> --- arch/arm/boot/dts/armada-38x.dtsi | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+)
diff --git a/arch/arm/boot/dts/armada-38x.dtsi b/arch/arm/boot/dts/armada-38x.dtsi
index e8b7f6726772..1b7d690d8e10 100644
--- a/arch/arm/boot/dts/armada-38x.dtsi
+++ b/arch/arm/boot/dts/armada-38x.dtsi@@ -540,6 +540,14 @@ status = "disabled"; }; + bm: bm@c8000 { + compatible = "marvell,armada-380-neta-bm"; + reg = <0xc8000 0xac>; + clocks = <&gateclk 13>; + internal-mem = <&bm_bppi>; + status = "disabled"; + }; + sata@e0000 { compatible = "marvell,armada-380-ahci"; reg = <0xe0000 0x2000>;
@@ -618,6 +626,16 @@ #size-cells = <1>; ranges = <0 MBUS_ID(0x09, 0x15) 0 0x800>; }; + + bm_bppi: bm-bppi { + compatible = "mmio-sram"; + reg = <MBUS_ID(0x0c, 0x04) 0 0x100000>; + ranges = <0 MBUS_ID(0x0c, 0x04) 0 0x100000>; + #address-cells = <1>; + #size-cells = <1>; + clocks = <&gateclk 13>; + status = "disabled"; + }; }; clocks {
--
2.5.0