[PATCH 12/16] batman-adv: Change ifconfig examples to iproute2
From: Antonio Quartulli <hidden>
Date: 2016-01-09 13:39:17
Subsystem:
documentation, networking [general], the rest · Maintainers:
Jonathan Corbet, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Linus Torvalds
From: Sven Eckelmann <sven@narfation.org> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <redacted> Signed-off-by: Antonio Quartulli <redacted> --- Documentation/networking/batman-adv.txt | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-)
diff --git a/Documentation/networking/batman-adv.txt b/Documentation/networking/batman-adv.txt
index 58e49042fc20..ff23b755f5e4 100644
--- a/Documentation/networking/batman-adv.txt
+++ b/Documentation/networking/batman-adv.txt@@ -115,14 +115,17 @@ The "bat0" interface can be used like any other regular inter- face. It needs an IP address which can be either statically con- figured or dynamically (by using DHCP or similar services): -# NodeA: ifconfig bat0 192.168.0.1 -# NodeB: ifconfig bat0 192.168.0.2 +# NodeA: ip link set up dev bat0 +# NodeA: ip addr add 192.168.0.1/24 dev bat0 + +# NodeB: ip link set up dev bat0 +# NodeB: ip addr add 192.168.0.2/24 dev bat0 # NodeB: ping 192.168.0.1 Note: In order to avoid problems remove all IP addresses previ- ously assigned to interfaces now used by batman advanced, e.g. -# ifconfig eth0 0.0.0.0 +# ip addr flush dev eth0 LOGGING/DEBUGGING
--
2.7.0