[PATCH 3/3] drivers: net: cpsw: use of_phy_connect() in fixed-link case
From: David Rivshin (Allworx) <hidden>
Date: 2015-12-23 00:36:34
Also in:
linux-arm-kernel, linux-devicetree, linux-omap
Subsystem:
networking drivers, the rest, ti ethernet switch driver (cpsw) · Maintainers:
Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Linus Torvalds
From: David Rivshin <redacted> If a fixed-link DT subnode is used, the phy_device was looked up so that a PHY ID string could be constructed and passed to phy_connect(). This is not necessary, as the device_node can be passed directly to of_phy_connect() instead. This reuses the same codepath as if the phy-handle DT property was used. Signed-off-by: David Rivshin <redacted> --- drivers/net/ethernet/ti/cpsw.c | 10 +--------- 1 file changed, 1 insertion(+), 9 deletions(-)
diff --git a/drivers/net/ethernet/ti/cpsw.c b/drivers/net/ethernet/ti/cpsw.c
index f9029e7..94b818c 100644
--- a/drivers/net/ethernet/ti/cpsw.c
+++ b/drivers/net/ethernet/ti/cpsw.c@@ -2038,29 +2038,21 @@ static int cpsw_probe_dt(struct cpsw_platform_data *data, "phy-handle", 0); parp = of_get_property(slave_node, "phy_id", &lenp); if (slave_data->phy_node) { dev_dbg(&pdev->dev, "slave[%d] using phy-handle=\"%s\"\n", i, slave_data->phy_node->full_name); } else if (of_phy_is_fixed_link(slave_node)) { - struct device_node *phy_node; - struct phy_device *phy_dev; - /* In the case of a fixed PHY, the DT node associated * to the PHY is the Ethernet MAC DT node. */ ret = of_phy_register_fixed_link(slave_node); if (ret) return ret; - phy_node = of_node_get(slave_node); - phy_dev = of_phy_find_device(phy_node); - if (!phy_dev) - return -ENODEV; - snprintf(slave_data->phy_id, sizeof(slave_data->phy_id), - PHY_ID_FMT, phy_dev->bus->id, phy_dev->addr); + slave_data->phy_node = of_node_get(slave_node); } else if (parp) { u32 phyid; struct device_node *mdio_node; struct platform_device *mdio; if (lenp != (sizeof(__be32) * 2)) { dev_err(&pdev->dev, "Invalid slave[%d] phy_id property\n", i);
--
2.5.0