[net-next 3/9] igb: Don't add PHY address to PCDL address
From: Jeff Kirsher <hidden>
Date: 2015-12-15 05:38:49
Subsystem:
intel ethernet drivers, networking drivers, the rest · Maintainers:
Tony Nguyen, Przemek Kitszel, Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Linus Torvalds
From: Aaron Sierra <redacted> There is no reason to add the PHY address into the PCDL register address. Signed-off-by: Aaron Sierra <redacted> Tested-by: Aaron Brown <redacted> Signed-off-by: Jeff Kirsher <redacted> --- drivers/net/ethernet/intel/igb/e1000_phy.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/drivers/net/ethernet/intel/igb/e1000_phy.c b/drivers/net/ethernet/intel/igb/e1000_phy.c
index c906826..8015f3b 100644
--- a/drivers/net/ethernet/intel/igb/e1000_phy.c
+++ b/drivers/net/ethernet/intel/igb/e1000_phy.c@@ -1734,8 +1734,7 @@ s32 igb_get_cable_length_m88_gen2(struct e1000_hw *hw) goto out; /* Get cable length from PHY Cable Diagnostics Control Reg */ - ret_val = phy->ops.read_reg(hw, (I347AT4_PCDL + phy->addr), - &phy_data); + ret_val = phy->ops.read_reg(hw, I347AT4_PCDL, &phy_data); if (ret_val) goto out;
--
2.5.0