[PATCH v2 3/4] e1000e: Do not write lsc to ics in msi-x mode
From: Benjamin Poirier <hidden>
Date: 2015-10-30 17:32:01
Also in:
intel-wired-lan, lkml
Subsystem:
intel ethernet drivers, networking drivers, the rest · Maintainers:
Tony Nguyen, Przemek Kitszel, Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Linus Torvalds
In msi-x mode, there is no handler for the lsc interrupt so there is no point in writing that to ics now that we always assume Other interrupts are caused by lsc. Reviewed-by: Jasna Hodzic <redacted> Signed-off-by: Benjamin Poirier <redacted> --- drivers/net/ethernet/intel/e1000e/defines.h | 3 ++- drivers/net/ethernet/intel/e1000e/netdev.c | 27 ++++++++++++++++----------- 2 files changed, 18 insertions(+), 12 deletions(-)
diff --git a/drivers/net/ethernet/intel/e1000e/defines.h b/drivers/net/ethernet/intel/e1000e/defines.h
index 133d407..f7c7804 100644
--- a/drivers/net/ethernet/intel/e1000e/defines.h
+++ b/drivers/net/ethernet/intel/e1000e/defines.h@@ -441,12 +441,13 @@ #define E1000_IMS_RXQ1 E1000_ICR_RXQ1 /* Rx Queue 1 Interrupt */ #define E1000_IMS_TXQ0 E1000_ICR_TXQ0 /* Tx Queue 0 Interrupt */ #define E1000_IMS_TXQ1 E1000_ICR_TXQ1 /* Tx Queue 1 Interrupt */ -#define E1000_IMS_OTHER E1000_ICR_OTHER /* Other Interrupts */ +#define E1000_IMS_OTHER E1000_ICR_OTHER /* Other Interrupt */ /* Interrupt Cause Set */ #define E1000_ICS_LSC E1000_ICR_LSC /* Link Status Change */ #define E1000_ICS_RXSEQ E1000_ICR_RXSEQ /* Rx sequence error */ #define E1000_ICS_RXDMT0 E1000_ICR_RXDMT0 /* Rx desc min. threshold */ +#define E1000_ICS_OTHER E1000_ICR_OTHER /* Other Interrupt */ /* Transmit Descriptor Control */ #define E1000_TXDCTL_PTHRESH 0x0000003F /* TXDCTL Prefetch Threshold */
diff --git a/drivers/net/ethernet/intel/e1000e/netdev.c b/drivers/net/ethernet/intel/e1000e/netdev.c
index 602fcc9..639fbe8 100644
--- a/drivers/net/ethernet/intel/e1000e/netdev.c
+++ b/drivers/net/ethernet/intel/e1000e/netdev.c@@ -4131,10 +4131,23 @@ void e1000e_reset(struct e1000_adapter *adapter) } -int e1000e_up(struct e1000_adapter *adapter) +/** + * e1000e_trigger_lsc - trigger a lsc interrupt + * + * Fire a link status change interrupt to start the watchdog. + **/ +static void e1000e_trigger_lsc(struct e1000_adapter *adapter) { struct e1000_hw *hw = &adapter->hw; + if (adapter->msix_entries) + ew32(ICS, E1000_ICS_OTHER); + else + ew32(ICS, E1000_ICS_LSC); +} + +int e1000e_up(struct e1000_adapter *adapter) +{ /* hardware has been reset, we need to reload some things */ e1000_configure(adapter);
@@ -4146,11 +4159,7 @@ int e1000e_up(struct e1000_adapter *adapter) netif_start_queue(adapter->netdev); - /* fire a link change interrupt to start the watchdog */ - if (adapter->msix_entries) - ew32(ICS, E1000_ICS_LSC | E1000_ICR_OTHER); - else - ew32(ICS, E1000_ICS_LSC); + e1000e_trigger_lsc(adapter); return 0; }
@@ -4577,11 +4586,7 @@ static int e1000_open(struct net_device *netdev) hw->mac.get_link_status = true; pm_runtime_put(&pdev->dev); - /* fire a link status change interrupt to start the watchdog */ - if (adapter->msix_entries) - ew32(ICS, E1000_ICS_LSC | E1000_ICR_OTHER); - else - ew32(ICS, E1000_ICS_LSC); + e1000e_trigger_lsc(adapter); return 0;
--
2.6.0