[PATCH net-next 1/2] net: hns: fixes the issue by using ethtool -s
From: yankejian <hidden>
Date: 2015-10-16 08:47:56
Also in:
lkml
Subsystem:
hisilicon network subsystem driver, networking drivers, the rest · Maintainers:
Jian Shen, Jijie Shao, Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Linus Torvalds
From: Chenny Xu <redacted> before this patch, hns driver only permits user to set the net device by using ethtool -s when the device is link up. it is obviously not so good. it needs to be set no matter it is link up or down. so this patch fixes this issue. Signed-off-by: yankejian <redacted> Signed-off-by: Yisen Zhuang <redacted> Signed-off-by: lisheng <redacted> Signed-off-by: lipeng <redacted> Signed-off-by: Chenny Xu <redacted> --- drivers/net/ethernet/hisilicon/hns/hns_ethtool.c | 39 ++++++++---------------- 1 file changed, 12 insertions(+), 27 deletions(-)
diff --git a/drivers/net/ethernet/hisilicon/hns/hns_ethtool.c b/drivers/net/ethernet/hisilicon/hns/hns_ethtool.c
index 2550208..e31c10b 100644
--- a/drivers/net/ethernet/hisilicon/hns/hns_ethtool.c
+++ b/drivers/net/ethernet/hisilicon/hns/hns_ethtool.c@@ -194,9 +194,7 @@ static int hns_nic_set_settings(struct net_device *net_dev, { struct hns_nic_priv *priv = netdev_priv(net_dev); struct hnae_handle *h; - int link_stat; u32 speed; - u8 duplex, autoneg; if (!netif_running(net_dev)) return -ESRCH;
@@ -206,48 +204,35 @@ static int hns_nic_set_settings(struct net_device *net_dev, return -ENODEV; h = priv->ae_handle; - link_stat = hns_nic_get_link(net_dev); - duplex = cmd->duplex; speed = ethtool_cmd_speed(cmd); - autoneg = cmd->autoneg; - - if (!link_stat) { - if (duplex != (u8)DUPLEX_UNKNOWN || speed != (u32)SPEED_UNKNOWN) - return -EINVAL; - - if (h->phy_if == PHY_INTERFACE_MODE_SGMII && h->phy_node) { - priv->phy->autoneg = autoneg; - return phy_start_aneg(priv->phy); - } - } if (h->phy_if == PHY_INTERFACE_MODE_XGMII) { - if (autoneg != AUTONEG_DISABLE) - return -EINVAL; - - if (speed != SPEED_10000 || duplex != DUPLEX_FULL) + if (cmd->autoneg == AUTONEG_ENABLE || speed != SPEED_10000 || + cmd->duplex != DUPLEX_FULL) return -EINVAL; } else if (h->phy_if == PHY_INTERFACE_MODE_SGMII) { - if (!h->phy_node && autoneg != AUTONEG_DISABLE) + if (!priv->phy && cmd->autoneg == AUTONEG_ENABLE) return -EINVAL; - if (speed == SPEED_1000 && duplex == DUPLEX_HALF) + if (speed == SPEED_1000 && cmd->duplex == DUPLEX_HALF) return -EINVAL; + if (priv->phy) + return phy_ethtool_sset(priv->phy, cmd); - if (speed != SPEED_10 && speed != SPEED_100 && - speed != SPEED_1000) + if ((speed != SPEED_10 && speed != SPEED_100 && + speed != SPEED_1000) || (cmd->duplex != DUPLEX_HALF && + cmd->duplex != DUPLEX_FULL)) return -EINVAL; } else { netdev_err(net_dev, "Not supported!"); return -ENOTSUPP; } - if (priv->phy) { - return phy_ethtool_sset(priv->phy, cmd); - } else if (h->dev->ops->adjust_link && link_stat) { - h->dev->ops->adjust_link(h, speed, duplex); + if (h->dev->ops->adjust_link) { + h->dev->ops->adjust_link(h, (int)speed, cmd->duplex); return 0; } + netdev_err(net_dev, "Not supported!"); return -ENOTSUPP; }
--
1.9.1